Mathias, M. J., Reynolds, T. and Velay, X., 2008. Possibilities and Pitfalls with Rapid Prototyping and Rapid Manufacturing: The Role of These Emerging Technologies in Design Education. In: New Perspectives in Design Education. EPDE 08: 10th International Conference on Engineering and Product Design Education. Institution of Engineering Designers and Design Society.

Eves, B. and Hewitt, J., 2008. Semiotics, Design Character Language. In: Clarke, A., Evatt, M., Hogarth, P., Lloveras, J. and Pons, L., eds. New Perspectives in Design Education. EPDE 08: 10th International Conference on Engineering and Product Design Education. Institution of Engineering Designers and Design Society, pp. 573-578.

Vali-Shariatpanahi, S., Jevons, M., Noroozi, S. and Vinney, J., 2008. Evaluation of In-Plane Shear Failure in Composite Laminates. In: 49th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials, 7-10 April 2008, Schaumburg, Illinois, USA.

Liu, Y. and Sahandi, R., 2008. Review of sensors for remote patient monitoring. In: Sixth IASTED International Conference on Biomedical Engineering: BioMed 2008, 13-15 February 2008, Innsbruck, Austria, pp. 408-413.

Dupac, M. and Constantinescu, N., 2008. 3D Steganography Models. Annals of University of Craiova - Mathematics and Computer Science Series, 35, pp. 97-102.

Amali, R., Noroozi, S., Vinney, J., Sewell, P. and Andrews, P.S., 2008. An Artificial Intelligence Approach for Measurement and Monitoring of Pressure at the Residual Limb/Socket Interface – A Clinical Study. Insight - Non-Destructive Testing and Condition Monitoring, 50 (7), pp. 374-383.

Sewell, P., Noroozi, S., Vinney, J., Amali, R. and Andrews, S., 2008. An Artificial Intelligence Approach for Measurement and Monitoring of Pressure at the Residual Limb/Socket Interface- A Clinical Approach. In: Proceedings CM 2008 / MFPT 2008 - The Fifth International Conference on Condition Monitoring & Machinery Failure Prevention Technologies Edinburgh, Scotland, UK, 15-18 July 2008. CM and MFPT, pp. 1294-1304.

Dyer, B. T.J., 2008. Can Prostheses Technology be Fairly Policed in Paralympic Running? In: Postgraduate Research Conference. (Unpublished)

Mathias, M. J., Velay, X. and Wade, R., 2008. The Challenges of Assessing Digital Product Design. In: 10th International Conference on Engineering and Product Design Education (EPDE08), 4 - 5 September, 2008, Universitat Politecnica de Catalunya, Barcelona, Spain. (Unpublished)

Sheppard, T. and Peng, Z., 2008. Control of Asymetric Recrystallization in Single and Multi-Hole Die Extrusion. In: ET 08: The Conference for Innovations in Aluminum Extrusion, 13-16 May 2008, Gaylord Palms, Orlando, FL. (Unpublished)

Vali-Shariatpanahi, S., Jevons, M., Noroozi, S. and Vinney, J., 2008. Evaluation of Failure in Pin-Loaded Laminates. In: 49th AIAA/ASME/ASCE/AHS/ASC Structures Structural Dynamics, and Materials, 7-10 April 2008, Schaumburg, Illinois, USA.

Sheppard, T., 2008. Keynote Address: Innovative Methodologies to Increase Productivity by Simulating Development of Structure During Extrusion and Solution Soaking. In: ET 08: The Conference for Innovations in Aluminum Extrusion, 13-16 May 2008, Gaylord Palms, Orlando, FL. (Unpublished)

Dupac, M., 2008. A Meshfree Modeling and Simulation of Sand Transportation and Topographical Formation caused by Wind Blowing. In: Grigoriadis, K., ed. Proceedings of the Intelligent Systems and Control (ISC 2008): Symposia: Computational Biology and Bioinformatics (CBB), Environmental Modelling and Simulation (EMS), Modern Nonlinear Theory (MNT). ACTA Press.

Popirlan, C.-I. and Dupac, M., 2008. Mobile Agent Virtual Reality Modeling of Searching Robots. Annals of University of Craiova - Mathematics and Computer Science Series, 35, pp. 139-148.

Ali, R., Dalpiaz, F. and Giorgini, P., 2008. Modeling and analyzing variability for mobile information systems. In: International Conference on Computational Science and Its Applications (ICCSA 2008), 30 June - 3 July 2008, Perugia, Italy.

Sheppard, T. and Velay, X., 2008. Prediction and Control of Subgrain Size in the Hot Extrusion of Aluminum Alloys with Feeder Plates. In: ET 08: The Conference for Innovations in Aluminum Extrusion, 13-16 May 2008, Gaylord Palms, Orlando, FL. (Unpublished)

Longjang, N., Sheppard, T. and Velay, X., 2008. Process Optimization and Metal Flow Analysis of Direct and Indirect Extrusion of Aluminium Using FEM Simulation. In: The 6th International Conference on Manufacturing Research (ICMRA08), September 2008, Brunel University, London. (Unpublished)

Dyer, B. T.J., 2008. The Relationship of Sports Ethics with Prosthesis Technology. In: DEC Research Conference, 2008, Bournemouth, England. (Unpublished)

Popirlan, C.-I. and Dupac, M., 2008. A web-base approach for 3D mechanism components generation and visualization. In: De Felice, F., ed. Proceedings of the 17th IASTED International Conference on Applied Simulation and Modelling, ASM 2008. Calgary, Canada: ACTA Press.

Popirlan, C.-I. and Dupac, M., 2008. A web-visualization approach for 3D elastic medium modeling and simulation. In: Proceedings of the 19th IASTED International Conference on Modelling and Simulation. Anaheim, CA, USA : ACTA Press , pp. 322-327.