Sewell, P., 2010. Teaching engineering at Bournemouth University. Impact: the voice of consultancy and engineering (34), p. 15.

Sahandi, R., Roushan, G., Bell, G. and Robinson, P., 2010. Managing Intellectual Capital in UK Higher Education: A Student Perspective. In: 2nd International Conference on Intellectual Capital Management (IICM 2010), 6-7 October 2010, Zanjan University, Zanjan, Iran.

Sahandi, R., 2010. Is wireless the answer? Hospital Information Technology Europe, 3 (3), pp. 18-21.

Eves, B., 2010. How Codes of Practice Might Improve Completion Rates in Design Research. In: Boks, C., McMahon, C., Ion, W. and Parkinson, B., eds. When Design Education and Design Research meet. EPDE 10: 12th International Conference on Engineering and Product Design Education. Institution of Engineering Designers and Design Society, pp. 30-35.

Sewell, P., Noroozi, S., Vinney, J., Amali, R. and Andrews, S., 2010. Improvements in the Accuracy of an Inverse Problem Engine's Output for the Prediction of Below-Knee Prosthetic Socket Interfacial Loads. Engineering Applications of Artificial Intelligence, 23 (6), pp. 1000-1011.

Dyer, B. T.J., Glasspool, C. R. and Terry, S., 2010. An educational and commercial product design symbiosis: a case study. In: EPDE2010: 12th International Conference on Engineering and Product Design Education: When Design Education and Design Research Meet, 2-3 September 2010, Norwegian University of Science and Technology (NTNU), Trondheim. (Submitted)

Dyer, B. T.J., Noroozi, S., Sewell, P. and Redwood, S., 2010. The Design of lower-limb sports prostheses: fair inclusion in disability sport. Disability and Society, 25 (5), pp. 593-602.

Dyer, B. T.J., 2010. Q&A: The Aerohelmet. Triathletes World, August, p. 35.

Dyer, B. T.J., 2010. The Evolution of Lower-limb Prostheses for Running in Elite Sport. In: World Congress of Science in Athletics, 24-26 July 2010, Barcelona, Spain. (Submitted)

Sahandi, R., 2010. Evolution of Wireless Technology and Remote Patient Monitoring. In: Contemporary Issues in Computer and Information Science Conference, 1-3 June 2010, Zanjan University, Zanjan, Iran. (Unpublished)

Dyer, B. T.J., 2010. 20 Ways To Get Free Speed. Triathlon Plus (16).

Sewell, P., 2010. Enhancing Design students’ engagement in technology-based subjects: A practical learning and online assessment strategy. In: DEC E-learning seminar, 26 May 2010, Bournemouth University, England. (Unpublished)

Dyer, B. T.J., Noroozi, S., Sewell, P. and Redwood, S., 2010. An Argument for Assessing Lower-Limb Sprinting Prostheses Technology. In: 13th ISPO World Congress, 10-15 May 2010, Leipzig, Germany. (Unpublished)

Sewell, P., 2010. Enhancing design student’s engagement in technology-based subjects: A practical learning and online assessment strategy. In: Education Enhancement Conference 2010, 20 May 2010, Bournemouth University. (Unpublished)

Dupac, M., 2010. Soil erosion and degradation based on sand particles transport caused by wind blowing. Natural Resource Modeling, 23 (2), pp. 121-137.

Iancu, I., Ghindeanu, M. and Dupac, M., 2010. A Takagi-Sugeno Type Controller for Mobile Robot Navigation. In: Proceedings of the 4th WSEAS International Conference on Computational Intelligence (CI10). University Politechnica, Bucharest.

Reynolds, T., 2010. First Contact Emotional Responses to Products. In: When Design Education and Design Research meet. EPDE 10: 12th International Conference on Engineering and Product Design Education. Institution of Engineering Designers and Design Society.

Sahandi, R., 2010. Electronic Admission and Monitoring System for Patients. In: Confenis, International Advanced Symposium on Enterprise Integration and Information Architecture, 10-11 March 2010, Kish, Iran.. (Unpublished)

Thompson, S., 2010. What is Dementia? Video/DVD. Poole, England: Bournemouth University. 01 March 2010.

Dyer, B. T.J., 2010. The Lotus Sport Bike. TTW, 1 (1), pp. 5-6.

Dyer, B. T.J. and Glasspool, C. R., 2010. An educational and commercial product design symbiosis: a case study. In: Boks, C., McMahon, C., Ion, W. and Parkinson, B., eds. When Design Education and Design Research meet: Proceedings of EPDE10. London: Institute of Engineering Designers and The Design Society, pp. 408-414.

Sahandi, R., Noroozi, S., Roushan, G., Heaslip, V. and Liu, Y., 2010. Wireless technology in the evolution of patient monitoring on general hospital wards. Journal of Medical Engineering & Technology, 34 (1), pp. 51-63.

Koohgilani, M. and Dyer, B. T.J., 2010. Design Students and their Prejudice Against Technology. Engineering Designer, 36 (2), pp. 22-26.

Dupac, M. and Beale, D. G., 2010. Dynamic analysis of a flexible linkage mechanism with cracks and clearance. Mechanisms and Machine Theory, 45 (12), pp. 1909-1923.

Vali-Shariatpanahi, S., Noroozi, S. and Vinney, J., 2010. Evaluation of in-plane shear failure in composite laminate with high percentage of 90o plies. In: 18th Annual International Conference on COMPOSITES/NANO ENGINEERING (ICCE -18), 4-10 July 2010, Anchorage, Alaska,USA,. (Unpublished)

Iancu, I., Colhon, M. and Dupac, M., 2010. A Fuzzy Controller with Various T-norms Applied in Robot Navigation. WSEAS Transactions on Systems and Control, 5 (11), pp. 882-891.

Khandan, R., Noroozi, S., Sewell, P. and Vinney, J., 2010. Optimum Design of Fibre Orientation Angles in Composite Laminate Plates for Minimum Thickness. In: ASME 2010 International Mechanical Engineering Congress & Exposition, 12-18 November 2010, Vancouver, British Columbia, Canada. (Unpublished)

Mousavi, A., Kalganova, T., Sandner-Kiesling, A., Flor, H., Cole, J., Noroozi, S., Zhang, J. J., Gilhooly, M., Gilbert, D. and Heiner, M., 2010. Phantom Limb Syndrome: An exploratory attempt to propose a VIrtual Personalised Solution to a Painful Problem. In: EMBC'10: 32nd Annual International Conference of the IEEE Engineering in Medicine and Biology Society, 31 August- 4 September2010, Buenos Aires Sheraton Hotel, Argentina. (Unpublished)

Reynolds, T., 2010. Researching First Contact Emotional Responses to Products. In: 12th International Conference on Engineering and Product Design Education, 2-3 September 2010, Trondheim, Norway. (Unpublished)

Khandan, R., Noroozi, S., Sewell, P. and Vinney, J., 2010. Smart Passive Adaptive Control of Composite Plates. In: ASME 2010 International Mechanical Engineering Congress & Exposition, 12-18 November 2010, Vancouver, British Columbia, Canada. (Unpublished)

Van de Vliet, P. and Dyer, B. T.J., 2010. Technology & Sports: The Future of Paralympic Sports. In: 13th ISPO World Congress, 10-15 May 2010, Leipzig, Germany. (Unpublished)

Koohgilani, M., 2010. Technophobia, an old problem, increasing challenges, new and old solutions. In: EPDE2010: 12th International Conference on Engineering and Product Design Education: When Design Education and Design Research Meet, 2-3 September 2010, Norwegian University of Science and Technology (NTNU), Trondheim. (Unpublished)

Dyer, B. T.J., 2010. Unleash The Beast: Technology and the Time Trial. In: Ilundáin-Agurruza, J. and Austin, M. W., eds. Cycling - Philosophy for Everyone: A Philosophical Tour de Force. Chichester, England: Wiley-Blackwell, pp. 39-50.

Koohgilani, M., 2010. Unscrambling the vocabulary of technology for designers and vice versa. In: EPDE2010: 12th International Conference on Engineering and Product Design Education: When Design Education and Design Research Meet, 2-3 September 2010, Norwegian University of Science and Technology (NTNU), Trondheim. (Unpublished)

Dyer, B. T.J., 2010. Variety is the Spice of Sport. Triathletes World. (In Press)

Dupac, M. and Popirlan, C.-I., 2010. Web Technologies for Modelling and Visualization in Mechanical Engineering. In: Kordic, V., ed. Modeling Simulation and Optimization - Tolerance and Optimal Control: Web Technologies for Modelling and Visualization in Mechanical Engineering. Vienna, Austria: IN-TECH.