Article

Dupac, M. and Furley, G., 2012. Improving pump efficiency by modifying the size and shape of the anti pre-rotation vane. Transactions of FAMENA, 36 (1), pp. 45-54.

Dupac, M., 2012. An object-oriented approach for mechanical components design and visualization. Engineering with Computers, 28 (2), pp. 95-107.

Dupac, M., 2012. The Dynamics of an Extensible Link with one and two Moving Ends. Annals of University of Craiova - Mathematics and Computer Science Series. (In Press)

Sahandi, R., Sewell, P., Noroozi, S. and Hewitt, M., 2012. Remote Monitoring of Lower-Limb Prosthetic Socket fit using Wireless Technologies. Journal of Medical Engineering & Technology, 36 (1), pp. 43-49.

Ramazani, M., Noroozi, S., Koohgilani, M., Cripps, B. and Sewell, P., 2012. Determination of static pressure loads on a marine composite panel from strain measurements utilising artificial neural networks. Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment. (In Press)

Noroozi, S., Sewell, P., Khandan, R. and Vinney, J., 2012. An Empirical Model of Ribbed Cylindrical Glass Reinforced Plastic Tanks. Applied Mechanics and Materials. (In Press)

Dyer, B. T.J., Sewell, P. and Noroozi, S., 2012. An Investigation into the Measurement of Mechanical Stiffness of Lower-limb Prosthesis in 100m Sprinting with a Uni-lateral Amputation. Assistive Technology. (Submitted)

Noroozi, S., Vinney, J. and Sewell, P., 2012. Investigation of bolt group configurations on load distribution and joint failure. Mechanics of Advanced Materials and Structures. (In Press)

Hunt, C., 2012. Learning in large learning spaces:the academic engagement of a diverse group of students. Research in Post-Compulsory Education, 17 (2), pp. 195-205.

Noroozi, S., Sewell, P., Vinney, J., Dyer, B. T.J., Rahman, A. G. A. and Zhi Chao, O., 2012. Modal analysis of composite prosthetic energy-storing-and-returning feet: an initial investigation. Proceedings of the Institution of Mechanical Engineers Part P: Journal of Sports Engineering and Technology. (In Press)

Khandan, R., Sewell, P., Noroozi, S. and Koohgilani, M., 2012. Optimum Design of Fibre Orientation in Composite Laminate Plates for Out-plane Stresses. Advanced Composite Letter. (Submitted)

Dyer, B. T.J., Sewell, P. and Noroozi, S., 2012. The Performance Improvement of Paralympic Lower-limb Amputee Sprinting and the Potential Impact of Prosthesis Technology. Journal of Sports Sciences. (Submitted)

Dyer, B. T.J., Sewell, P. and Noroozi, S., 2012. Performance improvement using lower-limb prosthesis in sprint running: a proposal. Sports Technology, . (Submitted)

Khandan, R., Noroozi, S., Vinney, J., Sewell, P. and Koohgilani, M., 2012. A Semi-Analytical Model for Buckling of Laminated plates with the NKQ Method. Applied Mechanics and Materials. (In Press)

Khandan, R., Noroozi, S., Sewell, P., Vinney, J. and Koohgilani, M., 2012. A Semi-Analytical Model for Deflection Analysis of Laminated plates with the Newton-Kantorovich-Quadrature Method. Journal of Composite Structures. (Submitted)

Dyer, B. T.J., Sewell, P., Noroozi, S., Broomfield, S. and Callaway, A., 2012. Sprint Prostheses used at the Paralympics: A proposal for an assessment method to maintain fairness. Prosthetics and Orthotics International. (Submitted)

Sewell, P., Noroozi, S., Vinney, J., Amali, R. and Andrews, S., 2012. Static and dynamic load prediction for prosthetic socket fitting assessment utilising an inverse problem approach. Artificial Intelligence in Medicine, 54, pp. 29-41.

Zhi Chao, O., Rahman, A. G. A., Ismail, Z and Noroozi, S., 2012. Study of open crack in rotor shaft using changes in Frequency Response Function (FRF) phase. Structural Control and Health Monitoring. (Submitted)

Reza Ramazani, M., Sewell, P., Noroozi, S., Khanadan, R. and Cripps, B., 2012. Using artificial neural networks and strain gauges for the determination of static loads on a thin square fully constrained composite marine panel subjected to a large central displacement. Insight (Northampton): non-destructive testing and condition monitoring. (In Press)

Dyer, B. T.J., Sewell, P. and Noroozi, S., 2012. The Value of technological progress in Paralympic Games sprinting with a lower-limb amputation. European Journal of Sports Science. (Submitted)

Khandan, R., Noroozi, S., Sewell, P. and Vinney, J., 2012. The development of laminated composite plate theories – a review. Journal of Materials Science. (In Press)

Rahman, A. G. A., Noroozi, S., Dupac, M., Al-Attas, S. M. S. M. and Vinney, J., 2012. A hybrid approach for non-destructive assessment and design optimisation and testing of in service machinery. Nondestructive Testing and Evaluation. (In Press)

Book Section

Eves, B., 2012. Design Semiotics. In: Garner, S. and Evans, C., eds. Design and designing: a critical introduction. Oxford: Berg.

Noroozi, S., Dupac, M. and Rahman, A. G. A., 2012. Dynamic Design Verification (DDV) of vertical pump using, combined Modal Analysis (MA), Finite Element Analysis (FEA) & Operation Deflection Shape (ODS). In: Recent Researches in Applied Mechanics: Proceedings of the 3rd International Conference on Theoretical and Applied Mechanics. WSEAS, pp. 18-23.

Dyer, B. T.J., 2012. I can but should I? Ethics and design. In: Evans, C. and Garner, S., eds. Design & Designing: A Critical Introduction. Oxford, England: Berg Publishers. (In Press)

Noroozi, S., Rahman, A. G. A., Dupac, M. and Vinney, J., 2012. Dynamic characteristics of prosthetic feet: A comparison between modal parameters of walking, running and sprinting foot. In: Proceedings of TMM 2012. Springer. (Submitted)

Dupac, M. and Noroozi, S., 2012. Modeling and Simulation of a Slider Crank Mechanism with a Flexible Extensible Link. In: Proceedings of the International Conference on the Theory of Machines and Mechanisms. Springer. (Submitted)

Cardew, G., Noroozi, S., Vinney, J. and Dupac, M., 2012. Optimal group configurations of fibre materials based on inclusion modelling. In: Key Engineering Materials. Trans Tech Publications Ltd, Laubisrutistr. 24, CH-8712 Stafa-Zurich, Switzerland.. (In Press)

Conference or Workshop Item

Romouzy Ali, A. M, Noroozi, S., Sewell, P. and Humphries-Smith, T., 2012. The Barriers Hindering Rapid Prototyping Deployment within Small and Medium-Sized Enterprises: Which Should Come First? In: Twelfth International Conference on Knowledge, Culture and Change Management, 6-8 July 2012, Chicago, USA. (Submitted)

Dyer, B. T.J., 2012. An investigation into the development, perception and assessment of lower-limb running prosthetics technology in paralympic sport. In: ICSEMIS 2012, 19-24 July 2012, Glasgow. (Submitted)

Book

Marghitu, D. B. and Dupac, M., 2012. Advanced Dynamics: Analytical and Numerical Calculations with MATLAB. SPRINGER. (In Press)