Schroeder, J. W., Dubey, V. N., Hickish, T. F. and Cole, J., 2012. Case Study on Repeatability of a Threshold-Based Calibration Method for Electrocutaneous Feedback Systems. In: Design of Medical Devices, 10-12 April 2012, Minneapolis, Minnesota, USA.

A

Dubey, Venketesh N., 2010. Upper Arm Wearable Exoskeleton. US20100113987A1.

Agrawal, S.. K, Dubey, V. N., Gangloff Jr., J. J., Brackbill, E., Mao, Y. and Sangwan, V., 2009. Design and Optimization of a Cable Driven Upper Arm Exoskeleton. Journal of Medical Devices, 3 (3).

Agrawal, S.K., Dubey, V. N., Gangloff Jr., J.J., Brackbill, E.A. and Sangwan, V., 2009. Optimization and design of a cable driven upper arm exoskeleton. In: ASME 2009 International Design Engineering Technical Conference, 30 August- 2 September 2009, San Diego, California, USA.

Abdul-Malik, N., Chappell, P., Wood, D. E. and Taylor, P.N., 2008. Measurement of relative joint angle and acceleration of the lower limb during walking. In: IFESS 2008: From Movement to Mind. 13th Annual International FES Society Conference, 21-25 September 2008, Freiburg, Germany, pp. 91-93.

Ahmed, R. and Hadfield, M., 1999. Failure Modes of Plasma Sprayed WC-15% Co Coated Rolling Elements. Wear, 230 (1), pp. 39-55.

Ahmed, R. and Hadfield, M., 1998. Rolling Contact Fatigue Performance of Plasma Sprayed Coatings. Wear, 220 (1), pp. 80-91.

Ahmed, R. and Hadfield, M., 1998. Fatigue Behaviour of HVOF Coated M-50 Steel Rolling Elements. Surface Engineering, 14 (6), pp. 473-480.

Anderson, J.A. and Polkinghorne, M., 1998. A rough start in life. Manufacturing Engineer, 77 (4), pp. 161-164.

Ahmed, R. and Hadfield, M., 1997. Experimental Measurement of the Residual Stress Field within Thermally Sprayed Rolling Elements. Wear, 209 (1-2), pp. 84-95.

Ahmed, R. and Hadfield, M., 1997. Wear of HVOF Coated Cones in Rolling Contact. Wear, 203-20 (March), pp. 98-106.

Ahmed, R. and Hadfield, M., 1997. Rolling Contact Fatigue Performance of Detonation Gun Coated Elements. Tribology International, 30 (2), pp. 129-137.

Anderson, J. and Polkinghorne, M., 1997. Application of HALT and HASS techniques for quality improvement. In: IMC-14: Sustainable technology in manufacturing industries : proceedings of the fourteenth Conference of the Irish Manufacturing Committee, 3-5 September 1997. Department of Mechanical and Manufacturing Engineering, Trinity College Dublin, pp. 223-228.

Anderson, J. and Polkinghorne, M., 1997. Application of HALT and HASS techniques in an advanced factory environment. In: International Conference on Factory 2000: Technology Exploitation Process, Cambridge 1997. Institution of Engineering and Technology, pp. 223-228.

Ahmed, R. and Hadfield, M., 1997. Rolling Contact Fatigue Performance of Plasma Sprayed Coatings. In: World Tribology Congress, 8-12 September, London, p. 156.

Ahmed, R. and Hadfield, M., 1996. Rolling Contact Fatigue Behaviour of Thermally Sprayed Rolling Elements. Surface and Coatings Technology, 82 (1/2), pp. 176-186.

Ahmed, R., Hadfield, M. and Tobe, S., 1996. Residual Stress Measurement of HVOF Coated Elements. In: NTSC 96: 9th National Thermal Spray Conference and Exposition, 7-11 October 1996, Cincinnati, Ohio, USA, pp. 875-883.

Ahmed, R. and Hadfield, M., 1996. Rolling Contact Fatigue Performance of HVOF Coated Elements. In: 4th International Conference on Advances in Surface Engineering, 14-17 May 1996, University of Northumbria, Newcastle, pp. 229-237.

B

Batty, R., Labeed, F. and Wood, D. E., 2009. Determination of foot orientation from in-shoe force data. In: IPEM Annual Medical Physics and Engineering Conference, 14-16 September 2009, Liverpool, UK, pp. 32-33.

Banks, A., 2009. A Nature inspired guidance system for unmanned autonomous vehicles employed in a search role. PhD Thesis (PhD). Bournemouth University.

Brackbill, E.A., Mao, Y., Agrawal, S.K., Annapragada, M. and Dubey, V. N., 2009. Dynamics and Control of a 4-dof Wearable Cable-driven Upper Arm Exoskeleton. In: IEEE ICRA2009: International Conference on Robotics and Automation, 12-17 May 2009, Kobe, Japan.

Breitbarth, T., 2009. Gesellschaftlicher Diskurs über Risiken moderner Technik – Eine Fallstudie zur Mobilfunktechnologie in Deutschland. Munich: AVM.

Bakhtiyarov, S., Dupac, M. and Overfelt, R. A., 2006. Shape Recovery of a Levitated Aspherical Droplet from 2D Image Information. Journal of Fluids Engineering, 123 (3), pp. 463-467.

Bakhtiyarov, S., Inal, O. T., Dupac, M., Guo, B. and Overfelt, R. A., 2005. A New image analysis method for shape prediction of a levitated aspherical droplet. Journal of Future Engineering and Technology, 1 (1), pp. 67-73.

Bakhtiyarov, S. I., Dupac, M., Overfelt, R. A. and Teodorescu, S. G., 2004. On Electrical Conductivity Measurements of Molten Metals by Inductive Technique. Journal of Fluids Engineering, 126 (3), pp. 468-471.

Burrows, R.J., Polkinghorne, M., Biss, T. and Smith, D., 1997. Implementation of QMS by employing a soft systems approach. In: International Conference on Factory 2000: Technology Exploitation Process, Cambridge, 1997. Institution of Engineering and Technology, pp. 376-380.

Beak, A., Cooper, B. and Polkinghorne, M., 1997. Investigations into the implementation of value analysis/value engineering to a specialist SME. In: International Conference on Factory 2000: Technology Exploitation Process, Cambridge 1997. Institution of Engineering and Technology.

Busso, E.P. and You, L.H., 1997. Prediction of deformation phenomena in metal forming processing. In: The 5th ACME-UK Conference , 1997.

Burrows, R.J. and Polkinghorne, M., 1997. Scheduling without tears. Manufacturing Engineer, 76 (3), pp. 129-132.

Burrows, R.J. and Polkinghorne, M., 1997. An appraisal of the new technological solutions applied to scheduling and scheduling systems for SMEs. In: International Conference on Factory 2000: Technology Exploitation Process, Cambridge, 1997. Institution of Engineering and Technology, pp. 229-234.

Baldwin, M., Polkinghorne, M., North, A. and Burns, R.S., 1995. An FMEA approach to risk assessment to conform with the EC machinery directive. In: Proceedings of the International Conference on Competitive Manufacturing, Cork, 6-8 September 1995. International Conference on Competitive Manufacturing, pp. 621-627.

Bland, R.J., Robinson, M.J., Polkinghorne, M. and Burns, R.S., 1994. The application of computer simulation for cost effective rtm production. In: Case, K. and Newman, S.T., eds. Advances in manufacturing technology VIII: Proceedings of the 10th National Conference on Manufacturing Research. Taylor and Francis, pp. 40-410.

C

Callaway, A. and Cobb, J. E., 2012. Linear acceleration measurement utilising inter-instrument synchronisation: A comparison between accelerometers and motion based tracking approaches. Measurement in Physical Education and Exercise Science. (In Press)

Cardew, G., Noroozi, S., Vinney, J. and Dupac, M., 2012. Optimal group configurations of fibre materials based on inclusion modelling. In: Key Engineering Materials. Trans Tech Publications Ltd, Laubisrutistr. 24, CH-8712 Stafa-Zurich, Switzerland.. (In Press)

Chang, J., Yang, X., Pan, J., Li, W. and Zhang, J. J., 2011. A fast hybrid computation model for rectum deformation. The Visual Computer, 27 (2), pp. 97-107.

Conrad, F. and Humphries-Smith, T., 2009. The Development of an On-Line Learning and Teaching Resource for the Socio-Centric Aspects of Sustainable Design. In: EPDE2009: Creating a Better World. International Conference on Engineering and Product Design Education. Unviersity of Strathclyde: The Design Society and IED, pp. 122-127.

Chang, J., Zhang, J. J. and Rehan, Z., 2009. Fast Vehicle Crash Modelling for Games. In: IEEE First International Conference Games and Virtual Worlds for Serious Applications, 23-24 March 2009, Technocentre Coventry University, UK., pp. 141-147.

Ciantar, C. and Hadfield, M., 2001. A Study on the Lapping of Ceramic Balls. In: Fourth International Conference on Computer Methods and Experimental Measurements for Surface Treatment Effects: Surface Treatment 99, September 1999, Assissi, pp. 389-399.

Ciantar, C. and Hadfield, M., 2000. An Environmental Evaluation of Mechanical Systems Using Environmentally Acceptable Refrigerants. International Journal of Life Cycle Assessment, 5 (4), pp. 209-220.

Ciantar, C., Hadfield, M., Smith, A.M. and Swallow, A., 2000. The Influence of POE and PVE Lubricant Blends Within Hermetic Refrigerating Compressors Operating With HFC-134a Refrigerant. Wear, 241 (1), pp. 53-61.

Cobb, J. E., 2000. An In-Shoe Laser Doppler Sensor for Assessing Plantar Blood Flow in the Diabetic Foot. PhD Thesis (PhD). Bournemouth University.

Crowder, R. M., Dubey, V. N. and Chappell, P., 2000. Dynamic Control of fingertip force using Tactile Sensors and Fuzzy Logic. In: 6th International Conference on Control, Automation, Robotics and Vision 2000, ICARCV 2000, 1 December 2000, Singapore.

Ciantar, C. and Hadfield, M., 2000. Environmental Consequences of Tribological Issues in Mechanical Systems Using Replacement Refrigerants. In: 1st International Conference on Tribology in Environmental Design 2000 : the Characteristics of Interacting Surfaces - a Key Factor in Sustainable and Economic Products, 3 - 6 September 2000, Bournemouth University, pp. 100-110.

Ciantar, C. and Hadfield, M., 2000. Factors Affecting the Sustainable Development in Domestic Refrigerators. International Appliance Manufacturing 2000, 4, pp. 209-220.

Ciantar, C., Hadfield, M., Smith, A.M. and Swallow, A., 1999. The Influence of Oil Viscosity on Compressor Components in HFC-134a Environments. Wear, 236 (1-2), pp. 1-8.

Ciantar, C. and Hadfield, M., 1999. Life Cycle Consequences of Domestic Refrigerating Systems Working in an HFC-134a Environment. In: ICED 99, Munich : communication and cooperation of practice and science : proceedings of the 12th International Conference on Engineering Design, 24-26 August 1999, Munich, Germany, pp. 269-272.

Crowder, R. M., Dubey, V. N., Chappell, P. and Whatley, D.R., 1999. A Multifingered End Effector for Unstructured Environments. In: IEEE International Conference on Robotics and Automation, 10-15 May 1999, Detroit, Michigan, USA, pp. 3038-3043.

Ciantar, C. and Hadfield, M., 1997. Indoor Air Quality in Environmentally-Friendly, Non Domestic Buildings. In: 1st International Conference on Energy and the Environment : Efficient Utilisation of Energy and Water Resources, 12th-14th October 1997, Limassol, Cyprus, pp. 403-412.

Charlton, D., Robinson, P. and Polkinghorne, M., 1997. Development of an enhanced video location and tracking system for an XY servo table. In: International Conference on Factory 2000: Technology Exploitation Process, Cambridge, 1997. Institution of Engineering and Technology, pp. 69-75.

D

Dupac, M. and Furley, G., 2012. Improving pump efficiency by modifying the size and shape of the anti pre-rotation vane. Transactions of FAMENA, 36 (1), pp. 45-54.

Dupac, M., 2012. An object-oriented approach for mechanical components design and visualization. Engineering with Computers, 28 (2), pp. 95-107.

Dupac, M., 2012. The Dynamics of an Extensible Link with one and two Moving Ends. Annals of University of Craiova - Mathematics and Computer Science Series. (In Press)

Dupac, M. and Noroozi, S., 2012. Modeling and Simulation of a Slider Crank Mechanism with a Flexible Extensible Link. In: Proceedings of the International Conference on the Theory of Machines and Mechanisms. Springer. (Submitted)

Dyer, B. T.J., Sewell, P., Noroozi, S., Broomfield, S. and Callaway, A., 2012. Sprint Prostheses used at the Paralympics: A proposal for an assessment method to maintain fairness. Prosthetics and Orthotics International. (Submitted)

De Groot, J.I.M., Steg, L. and Poortinga, W., 2012. Value orientations, perceived risks and benefits, and acceptability of nuclear energy. Risk Analysis. (In Press)

De Groot, J.I.M. and Thøgersen, J., 2012. Values and pro-environmental behaviour. In: Steg, L., Van den Berg, A. and De Groot, J.I.M., eds. Environmental psychology: An introduction. Oxford: Blackwell, pp. 141-152.

Dyer, B. T.J., 2012. An investigation into the development, perception and assessment of lower-limb running prosthetics technology in paralympic sport. In: ICSEMIS 2012, 19-24 July 2012, Glasgow. (Submitted)

Dyer, B. T.J., 2011. Design & Technology Within Elite Sport: Philosophy, Engineering & Prosthesis. In: 2nd Sporting Prosthetics Conference 2011, 11 November 2011, Hampden National Stadium, Glasgow, Scotland.

Dupac, M. and Noroozi, S., 2011. FEM modeling and dynamical behavior of a flexible cracked linkage mechanism with clearance. In: Naprstek , J., Horacek, J., Okrouhlík, M., Marvalova, B., Verhulst, F. and Sawicki, J., eds. Vibration Problems ICOVP 2011: 10th International Conference on Vibration Problems. Springer, pp. 275-280.

Dubey, V. N. and Agrawal, S.K., 2011. Study of an Upper Arm Exoskeleton for Gravity Balancing and Minimization of Transmitted Forces. Proceedings of the Institution of Mechanical Engineers, Part H, Journal of Engineering in Medicine, 225 (11), pp. 1025-1035.

Dubey, V. N. and Crowder, R. M., 2011. A robotic finger mechanism for robust industrial applications. Industrial Robot, 38 (4), pp. 352-360.

Dubey, V. N., Klopot , W. and Skupin, P., 2010. Implementation of Virtual Control Strategies for Natural Rehabilitation of Arm with Visual and Force Feedback. In: IEEE International Conference on Robotics and Biomimetics (ROBIO 2010), 14-18 December 2010, Tianjin, China.

De Groot, J. I.M. and Steg, L., 2010. Morality and nuclear energy: perceptions of risks and benefits, personal norms, and willingness to take action related to nuclear energy. Risk Analysis, 30 (9), pp. 1363-1373.

Dubey, V. N. and Agrawal, S.K., 2010. Gravity Balancing Conditions for an Upper Arm Exoskeleton. Journal of Medical Devices, 4 (027511).

Dubey, V. N. and Agrawal, S.K., 2010. Gravity balancing conditions for an upper arm exoskeleton. In: 2010 Design of Medical Devices Conference, 13-15 April 2010, Minneapolis, MN, USA. (In Press)

Dubey, V. N. and Grewal, G. S., 2010. Efficacy of photoelasticity in developing whole-field imaging sensors. Optics and Lasers in Engineering, 48 (3), pp. 288-294.

Dubey, V. N., 2010. Photoelasticity revived for Tactile Sensing. Dimensions: The newsletter from the British Society for Strain Measurement (Januar), p. 8.

Dupac, M. and Beale, D. G., 2010. Dynamic analysis of a flexible linkage mechanism with cracks and clearance. Mechanisms and Machine Theory, 45 (12), pp. 1909-1923.

Dupac, M. and Popirlan, C.-I., 2010. Web Technologies for Modelling and Visualization in Mechanical Engineering. In: Kordic, V., ed. Modeling Simulation and Optimization - Tolerance and Optimal Control: Web Technologies for Modelling and Visualization in Mechanical Engineering. Vienna, Austria: IN-TECH.

Dubey, V. N. and Grewal, G. S., 2009. Noise removal in three-fringe photoelasticity by median filtering. Optics and Lasers in Engineering, 47 (11), pp. 1226-1230.

Davis, M., Dubey, V. N. and Velay, X., 2009. Piezoelectric generators as battery chargers in mobile devices. In: ASME 2009 International Design Engineering Technical Conference, 30 August- 2 September 2009, San Diego, California, USA.

Dubey, V. N., 2009. Do it like a robot. Packaging Today, pp. 10-11.

Dubey, V. N., 2009. Design of a Gravity-balancing Upper-arm Orthosis for Older People. Project Report. The Royal Academy of Engineering.

Dubey, V. N. and Grewal, G. S., 2009. Load estimation from photoelastic fringe patterns under combined normal and shear forces. Journal of Physics: Conference Series, 181 (012074).

Dupac, M. and Beale, D. G., 2009. Numerical Study of Surface Oscillation of a Electromagnetically Levitated Droplet using Particle Method. In: Proceedings of the ASME 2009 International Mechanical Engineering Congress and Exposition (IMECE2009). ASME, pp. 234-239.

Dubey, V. N., 2009. Photoelastic Stress Analysis. In: Evans, J.E., Dulieu-Barton, J.M and Burguete, R.L., eds. Modern Stress and Strain Analysis A state of the art guide to measurement techniques. London: British Society for Strain Measurement and Eureka, pp. 10-11.

De Eyto, A., Hutchings, M. and Hadfield, M., 2008. Animating sustainable design-interdisciplinary education methods for students and professionals. Keynote lecture. In: EESD '08: Engineering Education in Sustainable Development 2008 Conference, 22-24 September 2008, Graz, Austria.

de Eyto, A., McMahon, M., Hadfield, M. and Hutchings, M., 2008. Strategies for Developing Sustainable Design Practice for Students and SME Professionals. European Journal of Engineering Education, 33 (3), pp. 331-342.

Dubey, V. N. and Crowder, R. M., 2008. Evolution of a novel finger mechanism for robust industrial end effectors. In: ASME International Design Engineering Technical Conference, 3-6 August 2008, Brooklyn, New York, USA.

Dupac, M., 2008. A Meshfree Modeling and Simulation of Sand Transportation and Topographical Formation caused by Wind Blowing. In: Grigoriadis, K., ed. Proceedings of the Intelligent Systems and Control (ISC 2008): Symposia: Computational Biology and Bioinformatics (CBB), Environmental Modelling and Simulation (EMS), Modern Nonlinear Theory (MNT). ACTA Press.

Dubey, V. N., Grewal, G. S. and Claremont, D. J., 2007. Load Extraction from Photoelastic Images Using Neural Networks. Experimental Mechanics, 47 (2), pp. 263-270.

Dubey, V. N. and Dai, J. S., 2007. Complex Carton Packaging with Dexterous Robot Hands. In: Huat, L.K., ed. Industrial Robotics: Programming, Simulation and Applications. Mammendorf, Germany: pro Literatur verlag Robert Mayer-Scholz/Advanced Robotics Systems International, pp. 583-594.

Dupac, M., 2007. Manifolds and Symplectic Manifolds Trajectories Generation and Visualization. Annals of University of Craiova - Mathematics and Computer Science Series, 34, pp. 100-106.

Dupac, M., 2007. Mechanism Components Generation and Visualization Using Mathematical Functions. In: Proceedings of the ASME 2007 Early Career Technical Conference, Engineering Center, Florida International University. ASME.

Dupac, M., 2007. A Mobile Agents approach for 3D elastic medium modeling and visualization. Annals of University of Craiova - Mathematics and Computer Science Series, 34, pp. 115-123.

Dupac, M., 2007. Numerical Algorithms for Modeling and Simulation. Universitaria Publishing House.

Dubey, V. N. and Grewal, G. S., 2007. Photoelastic stress analysis under unconventional loading. In: ASME International Design Engineering Technical Conference, 4-7 September 2007, Las Vegas, Nevada, USA, pp. 525-530.

Dubey, V. N. and Grewal, G. S., 2007. Tactile whole-field imaging sensor on photoelasticity. In: ASME International Design Engineering Technical Conference, 4-7 September 2007, Las Vegas, Nevada, USA, pp. 339-345.

Dupac, M. and Marghitu, D. B., 2006. Nonlinear dynamics of a flexible mechanism with impact. Journal of Sound and Vibration, 289 (4-5), pp. 952-966.

Dubey, V. N., Grewal, G. S. and Claremont, D. J., 2006. Extraction of load information from photoelastic images using neural networks. In: 2006 ASME International Design Engineering Technical Conferences & Computers and Information In Engineering Conference, 10-13 September 2006, Philadelphia, USA.

Dan, M. and Mihai , D., 2006. Open Kinematic Chains with Multiple Impacts. In: ICSV13: Proceedings of the Ninth International Congress on Sound and Vibration. Vienna, Austria: Institute of Sound and Vibration Research , pp. 23-29.

Dupac, M., 2006. Particle-based Magnetohydrodynamics Modeling and Visualization: Part I - Theoretical Model. Annals of University of Craiova - Mathematics and Computer Science Series, 30 (1), pp. 33-43.

Dupac, M., 2006. Particle-based Magnetohydrodynamics Modeling and Visualization: Part II - Numerical Simulation. Annals of University of Craiova - Mathematics and Computer Science Series, 30 (1), pp. 44-53.

Dupac, M., Beale, D. G. and Overfelt, R. A., 2005. Three-dimensional Lumped Mass/Lumped Spring Modeling and Nonlinear Behavior of a Levitated Droplet. Nonlinear Dynamics, 42 (1), pp. 25-42.

Dubey, V. N. and Crowder, R. M., 2005. Photoelasticity based dynamic tactile sensor. In: ASME International Design Engineering Technical Conference, 24-28 September 2005, Long Beach, California, USA, pp. 235-243.

Dupac, M., Marghitu, D. B. and Beale, D. G., 2004. Lumped Mass Modelling and Chaotic Behavior of an Elastic Levitated Droplet. Nonlinear Dynamics, 27 (4), pp. 311-326.

Dubey, V. N. and Crowder, R. M., 2004. Grasping and control issues in adaptive end effectors. In: ASME International Design Engineering Technical Conference, 28 September -2 October 2004, Salt Lake City, Utah (USA), pp. 327-335.

Dupac, M., Bakhtiyarov, S. and Overfelt, R. A., 2003. Volume Computation of a Levitated Aspherical Droplet From 2-D Image Information. In: ASME 2003: Proceedings of ASME International Mechanical Engineering Congress and Exposition. ASME, pp. 59-64.

Dyer, B. T.J., 2003. Citius, Altius, Fortius - Integrating Competitive Training Principles into the Designers World. In: Lowe, J.R., ed. Ethics in engineering design. Bury St Edmunds: Professional Engineering , pp. 109-116.

Dubey, V. N. and Crowder, R. M., 2003. Designing a dexterous reconfigurable packaging system for flexible automation. In: ASME International Design Engineering Technical Conference, 2-6 September 2003, Chicago, Illinois (USA), pp. 1033-1039.

Dupac, M. and Dupac, M., 2003. Modeling and Simulation of a Brake System Subject to a Dynamic Normal Force: Part I – Theoretical Model. Annals of University of Craiova, Seria Mechanica, 1, pp. 57-66.

Dupac, M. and Dupac, M., 2003. Modeling and Simulation of a Brake System Subject to a Dynamic Normal Force: Part II – Numerical Simulation and Results. Annals of University of Craiova, Seria Mecanica, 1, pp. 67-78.

Dyer, B. T.J., 2002. Is There a Preferred Profile for Students Entering onto a Holistic Product Design Course? In: Evatt, M.A.C. and Brodhurst, E.K., eds. Sharing experience in engineering design. Bury St Edmunds: Professional Engineering, pp. 11-17.

Dupac, M., Marghitu, D. B. and Crocker, M. J., 2002. Vibrations of Mechanism with Impact and Flexible Links. In: Proceedings of Ninth International Congress on Sound and Vibration. ICSV9, pp. 679-687.

Dubey, V. N. and Crowder, R. M., 2002. A finger mechanism for adaptive end effectors. In: ASME International Design Engineering Technical Conference, 29 September - 2 October 2002, Montreal, Canada, pp. 995-1001.

Dubey, V. N. and Dai, J. S., 2001. Modelling and Kinematic Simulation of a Mechanism extracted from a Cardboard Fold. International Journal of Engineering Simulation, 2 (3), pp. 3-10.

Dupac, M., Marghitu, D. B. and Beale, D. G., 2001. The dynamics of a Flexible Levitated Droplet. In: Proceedings of the 18th Biennial Conference on Mechanical Vibration and Noise. ASME.

Dubey, V. N., Dai, J. S. and Stamp, K.J., 2000. Extraction of Carton Information for the Purpose of Machine Reconfiguration. Technical Report. Port Sunlight Laboratory, Wirral: Unilever Research.

Dubey, V. N., Dai, J. S. and Stamp, K.J., 2000. Machine Reconfiguration Case Study for Rapid Changeovers from A Set of Prismatic Cartons. Technical Report. Port Sunlight Laboratory, Wirral: Unilever Research.

Dubey, V. N., Dai, J. S. and Stamp, K.J., 2000. Machine Reconfiguration Data from Complex Cartons. Technical Report. Port Sunlight Laboratory, Wirral: Unilever Research.

Dubey, V. N., Crowder, R. M. and Chappell, P., 1999. Optimal object grasp using Tactile sensors and fuzzy logic. Robotica, 17 (6), pp. 685-693.

Dubey, V. N., Dai, J. S. and Stamp, K.J., 1999. Advanced Modelling and Kinematic Simulation of a Complex Carton. Technical Report. Port Sunlight Laboratory, Wirral: Unilever Research.

Dubey, V. N., Dai, J. S. and Stamp, K.J., 1999. Advanced Modelling, Design and Experimental Work of a New Reconfigurable System for Packaging with a Multi-fingered Robot Hand. Technical Report. Port Sunlight Laboratory, Wirral: Unilever Research.

Dubey, V. N., Dai, J. S., Stamp, K.J. and Rees Jones, J., 1999. Kinematic Simulation of a Metamorphic Mechanism. In: Tenth World Congress on the Theory of Machine and Mechanisms (IFToMM), 20-24 June 1999, Oulu, Finland, pp. 98-103.

Dubey, V. N., Crowder, R. M. and Chappell, P., 1997. A Robotic End Effector for Unstructured Environments. In: 7th Topical Meeting on Robotics and Remote Systems, 27 April-1 May 1997, Radisson Riverfront Hotel and Conference Center, Augusta, Georgia, USA, pp. 452-459.

Dubey, V. N. and Ramarao, C.T., 1993. Robot Gripper: A Paradigm of Human Hand. In: Eighth National Convention of Production Engineers, 16-17 July 1993, Allahabad, India.

Dubey, V. N. and Suresh, K., 1992. A Study of Two-Wheeler Brakes. Journal of The Institution of Engineers (India) Journal-MC, 72, pp. 96-101.

E

Eves, B., 2010. How Codes of Practice Might Improve Completion Rates in Design Research. In: Boks, C., McMahon, C., Ion, W. and Parkinson, B., eds. When Design Education and Design Research meet. EPDE 10: 12th International Conference on Engineering and Product Design Education. Institution of Engineering Designers and Design Society, pp. 30-35.

Eves, B. and Hewitt, J., 2009. Style-Branding, Aesthetic Design DNA. In: Clarke, A., Ion, B., McMahon, C. and Hogarth, P., eds. Creating a Better World. EPDE 09 : 11th International Conference on Engineering and Product Design Education. Institution of Engineering Designers and Design Society, pp. 478-482.

Eves, B. and Reynolds, T., 2009. Back to the drawing board – the secrets of successful design. Bournemouth Echo, 9 June.

Eves, B. and Hewitt, J., 2008. Semiotics, Design Character Language. In: Clarke, A., Evatt, M., Hogarth, P., Lloveras, J. and Pons, L., eds. New Perspectives in Design Education. EPDE 08: 10th International Conference on Engineering and Product Design Education. Institution of Engineering Designers and Design Society, pp. 573-578.

Eves, B., Hogarth, P., Mathias, M. J., Velay, X. and Hewitt, J., 2007. Shaping the Future of Shape. In: Bohemia, E., Hilton, K., McMahon, C. and Clarke, A., eds. Shaping the Future? EPDE 07: 9th International Conference on Engineering and Product Design Education. Institution of Engineering Designers and Design Society, pp. 475-480.

Eves, B., 2007. Creative Design Research Group. In: Releasing Potential, 18 July 2007, Bournemouth University, England.

Edwards, P., 2003. Math insight with MathinSite. Higher Education Academy: Resources Database.

Edwards, P., 2003. Using mathematics diagnostic testing on engineering courses. LTSN MathsTEAM Project.

Edwards, P. and Edwards, P. M., 2003. Tackling the mathematics problem with MathinSite. Global Journal of Engineering Education, 7 (1), pp. 95-102.

Edwards, P. and Edwards, P. M., 2002. MathinSite: Java applets for deepening undergraduate understanding of engineering mathematics. In: 3rd Global Congress on Engineering Education, 30 June - 5 July 2002, Glasgow, Scotland. (Unpublished)

Edwards, P., 2002. MathinSite: web-based material for deepening the mathematical insight of engineering undergraduates. In: 2002 American Society for Engineering Education Annual Conference & Exposition, October 2002, Berlin. (Unpublished)

Edwards, P., Appleby, J. and Ahmad, J., 2001. Engineering mathematics should be taught by engineers! In: 27th Undergraduate Mathematics Teaching Conference, 3-6 September 2001, Birmingham, pp. 33-40.

Edwards, P., 2001. MathinSite: Java maths on the web. MSOR Connections, 1 (1), pp. 17-19.

Edwards, P. and Pountney, D., 2000. The use of the Internet in teaching mathematics (group A). In: 26th Undergraduate Mathematics Teaching Conference, 4-7 Sept 2000, Sheffield, pp. 60-70.

Evans, M., Cooper, B., Burns, R.S., Polkinghorne, M., Culverhouse, P. and Qurashi, Z.A., 1996. Automated test data analysis for a manufacturing application. In: Bramley, A.N., Mileham, A.R. and Owen, G.W., eds. Advances in Manufacturing Technology X: Proceedings of the 12th National Conference on Manufacturing Research. Bath, England: University of Bath, pp. 526-530.

Evans, M., Cooper, B., Polkinghorne, M., Burns, R.S. and Culverhouse, P., 1996. Automation test data analysis and charting for a manufacturing application. In: Proceedings of the Teaching Company Directorate seminar on manufacturing, 1996, Brighton. Teaching Company Directorate, pp. 37-47.

F

Ferraris, J., Tian, F. and Gatzidis, C., 2012. Feature-based probabilistic texture blending with feature variations for terrains. Computer Animation and Virtual Worlds. (In Press)

Fatjo, G., Hadfield, M., Vieillard, C. and Sekulic, J., 2009. Early Stage Cavitation Erosion within Ceramics: An Experimental Investigation. Ceramics International, 35 (8), pp. 3301-3312.

Flitta, I., Sheppard, T. and Peng, Z., 2007. FEM analysis to predict development of structure during extrusion and subsequent solution soak cycle. Materials Science and Technology, 23 (5), pp. 582-592.

Fathy, M. and Sahandi, R., 2002. A Neural Architecture for Image Vector Quantization. In: 3rd International Conference on Information Technology: Coding and Computing (IEEE ITCC2002), 8-10 April 2002, Las Vegas, Nevada.

G

Glasspool, C. R. and Dyer, B. T.J., 2011. Intellectual property: an issue when engaging in industrial collaborative student projects? In: Design Education for Creativity and Business Innovation: The 13th International Conference on Engineering and Product Design Education , 8-9 September 2011, City University, London. (Unpublished)

Gibson, D. and Polfreman, R., 2011. An Architecture For Creating Hosting Plug- Ins For Use In Digital Audio Workstations. In: International Computer Music Conference 2011, 31 July - 5 August 2011, University of Huddersfield, England..

García-Atance Fatjo, G., Torres Perez, A. and Hadfield, M., 2011. Experimental Study and Analytical Model of the Cavitation Ring Region With Small Diameter Ultrasonic Horn. Ultrasonics Sonochemistry, 18 (1), pp. 73-79.

Garland, N. P., Khan, Z. A. and Parkinson, B., 2010. Sustainable development for design engineering students: a peer assisted problem based learning approach. In: Boks, C., McMahon, C., Ion, W and Parkinson, B., eds. When Design Education and Design Research meet. EPDE 10: 12th International Conference on Engineering and Product Design Education. Glasgow, United Kingdom: The Design Society, pp. 370-375.

Grant-Braham, B., 2009. We're Racing Green: Environmental Motor Sport @ BU. Talbot magazine, 11.

Gabrys, B., 2009. Robust adaptive soft sensors for process industry - Keynote talk. In: International Workshop on Computational Intelligence in Security for Information Systems (CISIS'2009), 23-26 September 2009, Burgos, Spain. (Unpublished)

Garland, N. P., Hadfield, M., Howarth, G. and Middleton, D., 2009. Investment in Sustainable Development: A UK Perspective on the Business and Academic Challenges. Sustainability, 1 (4), pp. 1144-1160.

Gangloff Jr., J.J., Dubey, V. N. and Agrawal, S.K., 2007. Design of a Wearable Upper Extremity Orthotic Exoskeleton. In: Summer Undergraduate Research, 8 August 2007, University of Delaware, USA.

Grewal, G. S. and Dubey, V. N., 2007. Inverse problem of photoelastic fringe mapping using neural networks. Measurement Science and Technology, 18, pp. 1361-1366.

Grewal, G. S., Bharara, M., Cobb, J. E., Dubey, V. N. and Claremont, D. J., 2006. A Novel Approach to Thermochromic Liquid Crystal Calibration Using Neural Networks. Measurement Science and Technology, 17, pp. 1918-1924.

Grewal, G. S., Dubey, V. N. and Claremont, D. J., 2006. Diabetic Foot Ulceration: A predictor instrument for the pandemic. In: Britain’s Top Younger Scientists, Engineers and Technologist, 13 March 2006, The House of Commons, London.

Grewal, G. S., Dubey, V. N. and Claremont, D. J., 2005. Digital photoelasticity in assessment of shear forces in diabetic foot ulceration. In: 5th Academic Biomedical Engineering Research Group Workshop, 10 February 2005, Bournemouth University, England.

Grewal, G. S., Dubey, V. N. and Claremont, D. J., 2005. Shear force sensor for detection of diabetic foot ulceration. In: 2nd Life Sciences Interfaces (LSI) Conference, 1 December 2005, University of Southampton, England.

Gabrys, B. and Bargiela, A., 1999. Analysis of Uncertainties in Water Systems Using Neural Networks. Measurement + Control, 32 (5), pp. 145-147.

Gabrys, B. and Bargiela, A., 1999. Neural Networks Based Decision Support in Presence of Uncertainties. Journal of Water Resources Planning and Management, 125 (5), pp. 272-280.

Gabrys, B. and Bargiela, A., 1998. Simulation of Water Distribution Systems. In: The European Simulation Symposium (ESS'98), October 26-28, 1998, Nottingham, UK, pp. 273-277.

Gabrys, B. and Bargiela, A., 1997. Integrated Neural Based System for State Estimation and Confidence Limit Analysis in Water Networks. In: The 8th European Simulation Symposium, Ess 96. Society for Computer Simulation, pp. 398-402.

Gabrys, B. and Bargiela, A., 1995. Neural Simulation of Water Systems for Efficient State Estimation. In: The European Simulation and Modelling Conference (ESM'95), June 5-7, 1995, Prague, Czech Republic, pp. 775-779.

Goodson, K. J., 1987. Automated interpretation of digital images of hydrographic charts. PhD Thesis (PhD). Dorset Institute of Higher Education.

H

Hegde, S., Gatzidis, C. and Tian, F., 2013. Painterly rendering techniques: a state-of-the-art review of current approaches. Computer Animation and Virtual Worlds, 24 (1), pp. 43-64.

Humphries-Smith, T. and Glasspool, C. R., 2012. Final Year Induction - Re-engagement and Re-motivation. In: Baelus, C., Buck, L., De Grande, G., Frateur, G., Grace, J. and Ion, B., eds. E&PDE2012: Design education for future wellbeing. Antwerp, Belgium: Design Soceity & Institution of Engineering Designers. (Submitted)

Humphries-Smith, T. and Hunt, C., 2010. Developing enterprise opportunities from placements to graduate consultancy in lean sustainable design. In: Baggerud, B., Boks, C., Clarke, A., Hogarth, P., Ion, B. and McMahon, C., eds. Proceedings of 12th Engineering and Product Design Education International Conference. Trondheim, Norway: Norwegian University of Science & Technology, pp. 340-345.

Humphries-Smith, T., 2010. Several Shades of Green - do you do eco-design or sustainable design or neither. Engineering Designer, pp. 10-12.

Humphries-Smith, T. and Steiner, S., 2010. Engineering Our World Towards a Sustainable Future. In: Jones, P., Selby, D. and Sterling, S., eds. Sustainability Education - Perspectives and Practice Across Higher Education. London: Earthscan.

Hadfield, M., Wang, W. and Wereszczak, A.A., 2010. Mechanical properties of silicon nitride using RUS & C-Sphere methodology. In: CIMTEC 2010: 12th International Ceramics Congress, 6-11 June 2010, Montecatini Terme, Tuscany, Italy. (Unpublished)

Hart, D.J., Wood, D. E., Taylor, P.N. and Chappell, P., 2010. Catch-like stimulation – its effect on spinal reflexes and muscle activation. In: 1st Annual Conference of the International Functional Electrical Stimulation Society (UK and Ireland Chapter), 15-16 April 2010, University of Salford, England, p. 60.

Humphries-Smith, T., 2010. Socio-centric Sustainable Design - the Development of a Learning Resource. Engineering Education: Journal of the Higher Education Academy Engineering Subject Centre, 5 (1). (In Press)

Hassani, H., Gheitanchi, S. and Yeganegi, M. R., 2010. On the Application of Data Mining to Official Data. Journal of Data Science, 8 (1), pp. 75-89.

Humphries-Smith, T., 2009. Collaborative Student Centred Learning: Intellectual Property for Product Designers. In: EPDE2009: Creating a Better World. International Conference on Engineering and Product Design Education. University of Strathclyde: The Design Society and IED, pp. 49-54.

Hunt, C. and Reynolds, T., 2009. The Significance of Purchasing Behavioural Characterisation on Sustainable Design Education of Students. In: McMahon, C., Hogarth, P. and Ion, B., eds. Creating a Better World -Proceedings of the 11th Engineering and Product Design Education Conference, University of Brighton, 10th-11th September 2009. Design Society/ Institution of Engineering Designers, pp. 402-408.

Humphries-Smith, T. and Adrian, A., 2009. Intellectual Property Education – Thinking outside the Box meets Colouring within the Lines. International Journal of Learning & Intellectual Capital. (Submitted)

Hart, D.J., Wood, D. E., Taylor, P.N. and Chappell, P., 2008. Optimally spaced stimulation for clinical use with FES - its effect on spinal reflexes & muscle activation. In: IFESS 2008: From Movement to Mind. 13th Annual International FES Society Conference, 21-25 September 2008, Freiburg, Germany, pp. 135-137.

Hartshorn, D., Skalla, S., Harris, N., Turton, A., Hart, D.J., Wood, D. E. and Okirie, E., 2008. Do the use of alternating pressure air mattresses have an adverse affect on muscle tone – a pilot study. In: Seventh World Congress on Brain Injury, 9-12 April 2008, Lisbon, Portugal. (Unpublished)

Hart, D.J., Chappell, P., Wood, D. E. and Taylor, P.N., 2007. Investigation of the catch effect – its clinical use with functional electrical stimulation. In: University of Southampton’s Medicine, Health and Life Sciences Conference, June 2007, Southampton, England. (Unpublished)

Hart, D.J., Chappell, P., Wood, D. E. and Taylor, P.N., 2007. Investigation of the ‘catch effect’: its clinical use with FES. In: Meeting of the South-West IPEM Group, May 2007, Bath, England. (Unpublished)

Hart, D.J., Taylor, P.N., Chappell, P. and Wood, D. E., 2006. A microcontroller system for investigating the catch effect: functional electrical stimulation of the common peroneal nerve. Medical Engineering & Physics, 28 (5), pp. 438-448.

Hadfield, M., 2002. Book review: Manufacturing Surface Technology by B Griffiths (ed). Tribology International, 35 (12), p. 871.

Hadfield, M., 1998. Failure of Silicon Nitride Rolling Elements with Ring Crack Defects. Ceramics International, 24 (5), pp. 379-386.

Hadfield, M. and Tobe, S., 1998. Residual stress measurements of hot isostatically pressed silicon nitride rolling elements. Ceramics International, 24 (5), pp. 387-392.

Hadfield, M., Ahmed, R. and Tobe, S., 1997. Residual Stress Measurements of Silicon Nitride and Coated Tungsten Carbide Rolling Elements. In: Third International Conference on Computer Methods and Experimental Measurements for Surface Treatment Effects - Surface Treatment 97, 1997, Oxford, pp. 319-328.

Hadfield, M. and Stolarski, T A, 1995. The Effect of the Test Machine on the Failure Mode in Lubricated Rolling Contact of Silicon Nitride. Tribology International, 28 (6), pp. 377-382.

Heard, J., Grieve, D. and Polkinghorne, M., 1995. Application of Taguchi for the optimisation of machine tool settngs. In: Stockton, D. and Wainright, C., eds. Advances in Manufacturing Technology IX: Proceedings of the 11th National Conference on Manufacturing Research. London: Taylor and Francis, pp. 534-538.

Hadfield, M. and Stolarski, T.A., 1995. Observations of Delaminated Fatigue on Pre-Cracked Ceramic Elements in Rolling Contact. Ceramics International, 21 (2), pp. 125-130.

Hadfield, M. and Stolarski, T A, 1995. Observations of Lubricated Rolling Contact Fatigue on Silicon Nitride Rods. Ceramics International, 21 (1), pp. 13-19.

Heard, J., Grieve, D. and Polkinghorne, M., 1995. Problems associated with the cold roll forming of micro form sections. In: Proceedings of the International Conference on Competitive Manufacturing, Cork, 6-8 September 1995. International Conference on Competitive Manufacturing, pp. 297-303.

Hadfield, M., Ahmed, R. and Tobe, S., 1995. Rolling Contact Fatigue of Thermal Spray Coated Cones. In: ITSC '95 : 14th International Thermal Spraying Conference : Current Status and Future Trends, 22- 26 May 1995, Kobe, Japan, pp. 1097-1102.

Heard, J., Grieve, D. and Polkinghorne, M., 1995. An investigation into the design/manufacture of micro-rollers for cold roll forming. In: Advances in Manufacturing Technology IX: Proceedings of the 11th National Conference on Manufacturing Research. London: Taylor and Francis, pp. 97-101.

Hadfield, M., Tobe, S. and Stolarski, T A, 1994. Subsurface Crack Investigation on Delaminated Ceramic Elements. Tribology International, 27 (5), pp. 359-367.

Hadfield, M., Stolarski, T A and Cundill, R. T., 1993. Failure Modes of Ceramics in Rolling Contact. Royal Society: Proceedings: Mathematical and Physical Sciences, 443 (1919), pp. 607-621.

Hadfield, M., Stolarski, T A, Cundill, R. T. and Horton, S., 1993. Failure Modes of Pre-Cracked Ceramic Elements Under Rolling Contact. Wear, 169 (1), pp. 69-75.

Hadfield, M., Stolarski, T.A., Cundill, R. T. and Horton, S., 1993. Failure Modes of Ceramic Elements with Ring-Crack Defects. Tribology International, 26 (3), pp. 157-164.

Hadfield, M., Stolarski, T A and Cundill, R. T., 1993. Delamination of Ceramic Balls in Rolling Contact. Ceramics International, 19 (3), pp. 151-158.

Hadfield, M., Stolarski, T A, Fujinawa, G and Tobe, S., 1993. Residual Stresses in Failed Ceramic Rolling Contact Balls. Ceramics International, 19 (5), pp. 307-313.

Hadfield, M., Stolarski, T A and Tobe, S., 1992. Analysis of Silicon Nitride Ball Failure Due to Rolling Contact Fatigue. In: ICR 92 Conference, Birmingham, pp. 297-302.

Hadfield, M., 1990. Prediction of Alfin Bond Stresses in Ruston RKC Pistons. Technical Report. AE Piston Products Ltd.

Hadfield, M., 1989. Finite Element Analysis of the KHD BFL913 Gallery Cooled Piston. Technical Report. Wellworthy Ltd.

I

Ingole, S., Khan, Z. A., Paluri, R. and Ozaydin, F., 2011. Mechanical Characterization of Alumina in-situ Aluminum Di-borides Nano Composites. In: 2012 TMS Annual Meeting & Exhibition, 11-15 March 2012, Orlando, FL, USA. (Unpublished)

Iancu, I., Ghindeanu, M. and Dupac, M., 2010. A Takagi-Sugeno Type Controller for Mobile Robot Navigation. In: Proceedings of the 4th WSEAS International Conference on Computational Intelligence (CI10). University Politechnica, Bucharest.

Iancu, I., Colhon, M. and Dupac, M., 2010. A Fuzzy Controller with Various T-norms Applied in Robot Navigation. WSEAS Transactions on Systems and Control, 5 (11), pp. 882-891.

J

Jang, J. and Hadfield, M., 2006. The Influences of Natural Surface Defects on Rolling Contact Fatigue Failure Modes of HIPed Si3 N4. Industrial Ceramics Journal, 22 (3), pp. 121-128.

K

Khan, Z. A., 2012. Finite element analysis approach to assess pressurised system. In: 2nd International Symposium on Frontiers of Computational Sciences, 28-29 June 2012, Islamabad, Pakistan. (Submitted)

Khan, Z. A., 2012. Tribology Research Informed Education Provisions. In: 9th Tribo-UK conference, 14 - 15 March 2012, University of Southampton, Southampton, England. (Unpublished)

Khandan, R., Sewell, P., Noroozi, S. and Koohgilani, M., 2012. Optimum Design of Fibre Orientation in Composite Laminate Plates for Out-plane Stresses. Advanced Composite Letter. (Submitted)

Khandan, R., Noroozi, S., Vinney, J., Sewell, P. and Koohgilani, M., 2012. A Semi-Analytical Model for Buckling of Laminated plates with the NKQ Method. Applied Mechanics and Materials. (In Press)

Khandan, R., Noroozi, S., Sewell, P., Vinney, J. and Koohgilani, M., 2012. A Semi-Analytical Model for Deflection Analysis of Laminated plates with the Newton-Kantorovich-Quadrature Method. Journal of Composite Structures. (Submitted)

Khandan, R., Noroozi, S., Sewell, P. and Vinney, J., 2012. The development of laminated composite plate theories – a review. Journal of Materials Science. (In Press)

Khan, Z. A., Chinnakurli, R. and Ahamed, A., 2011. Study on Slurry Erosive Wear Behaviour of Al 6063-TiB2 In Situ Composites. In: STLE 2012 Annual Meeting & Exhibition, 6-10 May 2012, St. Louis, MO, USA. (Submitted)

Khan, Z. A., Chinnakurli, R., Mp, H. and Ks, N., 2011. Development of Nickel-CNT Electro Composites. In: STLE 2012 Annual Meeting and Exhibition, 6-10 May 2012, St. Louis, MO, USA. (Submitted)

Khan, Z. A., Saeed, A. and Garland, N. P., 2011. An experimental study of Tribo-corrosion in historic military vehicles. In: 4th China-UK Symposium on Lubrication and Chemical Aspect of Wear, 29-30 March 2012, Southampton, England. (Submitted)

Koohgilani, M., Khan, Z. A. and Parkinson, B., 2011. A novel softer and more creative approach for materials selection while Incorporating emotional aspects. In: 13th International Conference on Engineering and Product Design Education. (In Press)

Kadlec, P. and Gabrys, B., 2011. Local learning-based adaptive soft sensor for catalyst activation prediction. AIChE Journal, 57 (5), pp. 1288-1301.

Khan, Z. A., 2011. Sustainable Design. In: Unlocking Innovative Technologies to Improve Your Business - First AAE iNet Annual Conference , 15 March 2011, The Exchange, Bridgewater. (Unpublished)

Karunamurthy, B., Hadfield, M., Vieillard, C. and Morales-Espejel, G.E., 2010. Cavitation erosion in silicon nitride: Experimental investigations on the mechanism of material degradation. Tribology International, 43 (12), pp. 2251-2257.

King, R. D., Schierz, A. C., Clare, A., Rowland, J., Sparkes, A., Nijssen, S. and Ramon, J., 2010. Inductive queries for a drug designing robot scientist. In: Dzeroski, S., Goethals, B. and Panov, P., eds. Inductive Databases and Constraint-Based Data Mining. Springer, pp. 421-451.

Khan, Z. A., 2010. Getting ahead. newdesign (82), pp. 28-29.

Khan, Z. A., 2010. Fatigue Life Performance of Lubricated Hybrid Rolling Contact Bearing Elements. In: STLE 65th Annual Meeting & Exhibition, 16-20 May 2010, Las Vegas, Nevada (USA), P134.

Khan, Z. A. and Hadfield, M., 2010. Rolling Contact Fatigue and Residual Stress in Hybrid Steel Ceramic Rolling Bearing Elements. In: Third International Conference on Tribology & Design, 11-13 May 2010, The Algarve, Portugal. (Unpublished)

Karunamurthy, B., Hadfield, M., Vieillard, C., Morales-Espejel, G.E. and Khan, Z. A., 2010. Cavitation and Rolling Wear in Silicon Nitride. Ceramics International, 36 (4), pp. 1373-1381.

Khandan, R., Noroozi, S., Sewell, P. and Vinney, J., 2010. Optimum Design of Fibre Orientation Angles in Composite Laminate Plates for Minimum Thickness. In: ASME 2010 International Mechanical Engineering Congress & Exposition, 12-18 November 2010, Vancouver, British Columbia, Canada. (Unpublished)

Khandan, R., Noroozi, S., Sewell, P. and Vinney, J., 2010. Smart Passive Adaptive Control of Composite Plates. In: ASME 2010 International Mechanical Engineering Congress & Exposition, 12-18 November 2010, Vancouver, British Columbia, Canada. (Unpublished)

Kadlec, P. and Gabrys, B., 2009. Architecture for development of adaptive on-line prediction models. Memetic Computing, 1 (4), pp. 241-269.

Khan, Z. A. and Hadfield, M., 2009. An Investigation of Residual Stresses within Hertzian Contact of Lubricated Rolling Bearing Elements. In: Society of Tribologists and Lubrication Engineers (STLE) 64th Annual Meeting and Exhibition, 17-21 May 2009, Coronado Springs Resort, FL, USA, p. 134.

Kadlec, P. and Gabrys, B., 2009. Evolving on-line prediction model dealing with industrial data sets. In: 2009 IEEE Workshop on Evolving and Self-Developing Intelligent Systems Proceedings. Nashville: IEEE, pp. 24-31.

Khan, Z. A. and Hadfield, M., 2008. Wear of Rolling Bearing Materials with Refrigerant Lubrication. In: Society of Tribologists and Lubrication Engineers (STLE) 63rd Annual Meeting and Exhibition, 18-22 May 2008, Cleveland, Ohio, USA.

Khan, Z. A., 2006. Rolling Contact Wear of Hybrid Ceramic Bearings with Refrigerant Lubrication. PhD Thesis (PhD). Bournemouth University.

Khan, Z. A., Hadfield, M. and Wang, Y., 2005. Rolling wear of silicon nitride bearing materials with refrigerant lubrication. In: Mission of Tribology Research 14, 7 December 2005, London, UK.

Kennaugh, K., Strike, P., Stainthorpe, A. and Wood, D. E., 2005. Validity of walking speed assessment as a performance measure for stroke patients. In: 3rd International Conference on Biomechanics of the Lower Limb in Health, Disease and Rehabilitation, 5-7 September 2005, Salford, England.

Khan, Z. A., Hadfield, M. and Wang, Y., 2005. Pressurised Chamber Design for Conducting Rolling Contact Experiments with Liquid Refrigerant Lubrication. Materials and Design, 26 (8), pp. 680-689.

Khan, Z. A., Hadfield, M., Tobe, S. and Wang, Y., 2005. Ceramic rolling elements with ring crack defects—A residual. Materials Science and Engineering A, 404 (1-2), pp. 221-226.

Kang, J. and Hadfield, M., 2004. Examination of the material removal mechanisms during the lapping process of advanced ceramic rolling elements. Wear, 258, pp. 2-12.

Khan, Z. A. and Hadfield, M., 2004. Design and Finite Element Analysis of a Novel Pressurised Chamber to Conduct Rolling Contact Experiments using Refrigerant Lubrication. In: Britain’s Top Younger Scientists, Engineers and Technologist, 15 September 2004, The House of Commons, London.

Khan, Z. A., Hadfield, M. and Wang, Y., 2004. Design of a novel pressurized chamber to assess in-use durability performance of rolling contact elements using refrigerant lubrication. In: 4th Intl. Conf. Advanced Engineering Design, 5-8 September 2004, Glasgow Scotland, UK.

Kanyaru, J.M. and Phalp, K. T., 2004. A Lightweight State Machine for Validating Use Case Descriptions. Technical Report. Bournemouth: ESERG.

Kanyaru, J.M., Phalp, K. T. and Sheppard, T., 2004. Enhancing Use Case Descriptions With States: Validation Via Enaction. In: PREP Conference, 5-7 April 2004, University of Hertfordshire, England. (Unpublished)

Kang, J. and Hadfield, M., 2003. Comparison of Four-Ball and Five-Ball Rolling Contact Fatigue Tests on Lubricated Si3N4/Steel Contact. Materials & Design, 24 (8), pp. 595-604.

Khan, Z. A. and Zhen, P. J., 2001. Corrosion Fatigue & Remaining Life Assessment Techniques of 16MnR Pressure Vessel Steel. Project Report. Shanghai: Ministry of Labour, Government of the Peoples’ Republic of China.

Kang, J. and Hadfield, M., 2000. The Influence of Heterogeneous Porosity On Silicon Nitride/Steel Wear In Lubricated Rolling Contact. Ceramics International, 26 (3), pp. 315-324.

Khan, Z. A. and Zhen, P. J., 2000. Corrosion fatigue of 16Mn pressure vessel steel in H2S environment. American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, 413, pp. 49-54.

Kang, J. and Hadfield, M., 1999. Rolling Contact Failure Modes of Lubricated Silicon Nitride in Relation to Surface Defects. In: 9th World Ceramics Congress and Forum on New Materials: Ceramics : getting into the 2000's, 14-19 June 1998, Florence, Italy, pp. 533-540.

L

Liu, M., Seah, H., Zhu, C. and Tian, F., 2012. Reducing location map in prediction-based difference expansion for reversible image data embedding. Signal Processing, 92 (3), pp. 819-828.

Liu, Y. and Sahandi, R., 2009. Zigbee Network for Remote Patient Monitoring. In: 22nd International Symposium on Information, Communication and Automation Technologies, 29-31 October 2009, Sarajevo, Bosnia & Herzegovina.

Liu, Y. and Sahandi, R., 2008. Review of sensors for remote patient monitoring. In: Sixth IASTED International Conference on Biomedical Engineering: BioMed 2008, 13-15 February 2008, Innsbruck, Austria, pp. 408-413.

Li, J., Li, R.F. and You, L.H., 2000. Dynamic simulation of microstructure evolution during hot forging for engine stigmata. Chinese Journal of Mechanical Engineering, 13 (1), pp. 35-40.

Long, S.Y., Beffort, O., Flower, H.M. and You, L.H., 2000. Influence of microstructure on axial strength of unidirectional continuous fibre reinforced aluminium matrix composites. Materials Science and Technology, 16 (7-8), pp. 806-810.

Longster, J. A., Sahandi, R. and Vine, D. S. G., 1999. Prosody Generation and Segment Concatenation in the Time Domain. In: International Workshop: Speech and Computer (SPECOM'99), October 1999, Moscow, Russia.

Leavey, C., Polkinghorne, M., Sutton, R. and Pearce, J., 1999. Towards an intelligent design to manufacture process for bespoke product development. In: IMC 15: Proceedings of the Fifteenth Conference of the Irish Manufacturing Committee, Ulster , 1998. University of Ulster, pp. 253-251.

Leavey, C., Burrows, R.J., Pearce, J. and Polkinghorne, M., 1998. CE marking within a manufacturing SME: trials and tribulations. In: IMC 15: Proceedings of the Fifteenth Conference of the Irish Manufacturing Committee, Ulster , 1998. University of Ulster, pp. 565-574.

Longster, J. A. and Sahandi, R., 1998. Facial Animation to Support Bi-modal Communication. In: The International Conference on Knowledge Transfer Through Multimedia & Virtual Reality, 13-14 April 1998, National Research Centre, Cairo, Egypt.

Long, S.Y. and You, L.H., 1997. Effect of fibre-matrix chemistry on interfacial structure, fracture behaviour and axial tensile strength of cast CFMMCs. In: IPCM '97: 5th International Conference on Interfacial Phenomena in Composite Materials, 1-3 September 1997, Eger, Hungary.

Lyall, D., Bennett, J. and Polkinghorne, M., 1996. Lead time reduction through design automation. In: Bramley, A.N., Mileham, A.R. and Owen, G.W., eds. Advances in Manufacturing Technology X: Proceedings of the 12th National Conference on Manufacturing Research. Bath, England: University of Bath.

M

Marghitu, D. B. and Dupac, M., 2012. Advanced Dynamics: Analytical and Numerical Calculations with MATLAB. SPRINGER. (In Press)

Mecheraoui, C., Cobb, J. E. and Swain, I. D., 2012. Evaluation of a wireless in-shoe sensor based on ZigBee used for Drop Foot Stimulation. IEEE Radio & Wireless Week.

Mecheraoui, C., Cobb, J. E. and Swain, I. D., 2011. Wireless network of local stimulators and sensors for people with neurological disabilities. In: 8th European Conference on Wireless Sensor Networks (EWSN 2011), February 23-25, Bonn, Germany. (Unpublished)

Mecheraoui, C., Cobb, J. E. and Swain, I. D., 2010. Sensors for triggering practical Functional Electrical Stimulation walking systems. In: 1st Annual Conference of the International Functional Electrical Stimulation Society (UK and Ireland Chapter), 15-16 April 2010, University of Salford, England. (Unpublished)

Mousavi, A., Kalganova, T., Sandner-Kiesling, A., Flor, H., Cole, J., Noroozi, S., Zhang, J. J., Gilhooly, M., Gilbert, D. and Heiner, M., 2010. Phantom Limb Syndrome: An exploratory attempt to propose a VIrtual Personalised Solution to a Painful Problem. In: EMBC'10: 32nd Annual International Conference of the IEEE Engineering in Medicine and Biology Society, 31 August- 4 September2010, Buenos Aires Sheraton Hotel, Argentina. (Unpublished)

Mihai, D. and Chandi, B., 2007. A Study of Noise Reduction by Damping Layer Materials. In: Proceedings of the 25th Annual Brake Colloquium, Session: Effect of Brake Pad and Insulator Designs. SAE.

McMahon, M. and Hadfield, M., 2007. The Butterfly Effect: Creative Sustainable Design Solutions through Systems thinking. In: The 16th International Conference on Flexible Automation and Intelligent Manufacturing: FAIM 2006, 26-28 June 2006, University of Limerick, Ireland, pp. 247-254.

Mihai, D., 2006. 3D Modeling and Simulation of Deformable Elastic Body - Rigid Body Interaction. In: AIDC 2006: Proceedings of the 6th International Conference on Artificial Intelligence and Digital Communications. RCAI, pp. 8-18.

Maheri, A., Noroozi, S., Toomer, C. A. and Vinney, J., 2005. Efficient meshing of a wind turbine blade using force adaptive mesh sizing functions. Renewable Energy, 32 (1), pp. 95-104.

Maheri, A., Noroozi, S., Toomer, C. A. and Vinney, J., 2005. WTAB, a computer program for predicting the performance of horizontal axis wind turbines with adaptive blades. Renewable Energy, 31 (11), pp. 1673-1685.

McDougall, S., Forsythe, A. and Stares, L., 2005. Icon Use by Different Language Groups: Changes in Icon Perception in Accordance with Cue Utility. In: Costabile, M. F. and Paterno, F., eds. Human-Computer Interaction: INTERACT 2005. Germany: Springer, pp. 1083-1086.

Mihai, D., 2004. A Voronoi Technique for Computing the Radius of Interaction in Particle Method: Application for a Levitated Droplet. In: AIDC 2004: Proceedings of 4th AIDC International Conference. RCAI, pp. 86-94.

McDougall, S., De Bruijn, O. and Curry, M., 1999. Finding out what users really think: using cognitive modelling to improve icon design. In: Harris, D., ed. Engineering Psychology and Cognitive Ergonomics: Job Design, Product Design and Human-Computer Interaction. Aldershot, Hampshire: Ashgate Publishing Limited, pp. 173-180.

Macey, J.P. and Sahandi, R., 1998. An Evaluation of Low Cost Visual Speech Synthesis Systems. In: The International Conference on Knowledge Transfer Through Multimedia & Virtual Reality, 13-14 April 1998, National Research Centre, Cairo, Egypt,.

Marshall, D. and Polkinghorne, M., 1997. Implementation of a generic design methodology for cost effective quality. In: Proceedings of the Teaching Company Directorate Seminar on Effective Quality, London 1997. Teaching Company Directorate.

Marshall, D. and Polkinghorne, M., 1997. The operational advantages for manufacture of employing a generic design methodology. In: International Conference on Factory 2000: Technology Exploitation Process, Cambridge, 1997. IET, pp. 235-239.

May, S.J., Polkinghorne, M., Burns, R.S. and Roberts, G.N., 1995. Ensuring competitive manufacture by product re-engineering. In: Stockton, D. and Wainwright, C., eds. Advances in Manufacturing Technology IX: Proceedings of the 11th National Conference on Manufacturing Research. London: Taylor and Francis, pp. 805-809.

May, S.J., Polkinghorne, M., Burns, R.S. and Roberts, G.N., 1995. Re-engineering of product design for competitive manufacture. In: Proceedings of the International Conference on Competitive Manufacturing, Cork, 6-8 September 1995. International Conference on Competitive Manufacturing, pp. 667-673.

May, S.J., Polkinghorne, M., Bennett, J.P. and Burns, R.S., 1994. The applicability of concurrent engineering to design in a manufacturing company. In: Case, K. and Newman, S.T., eds. Advances in manufacturing technology VIII: Proceedings of the 10th National Conference on Manufacturing Research. Taylor and Francis, pp. 457-461.

N

Noroozi, S., Dupac, M. and Rahman, A. G. A., 2012. Dynamic Design Verification (DDV) of vertical pump using, combined Modal Analysis (MA), Finite Element Analysis (FEA) & Operation Deflection Shape (ODS). In: Recent Researches in Applied Mechanics: Proceedings of the 3rd International Conference on Theoretical and Applied Mechanics. WSEAS, pp. 18-23.

Noroozi, S., Rahman, A. G. A., Dupac, M. and Vinney, J., 2012. Dynamic characteristics of prosthetic feet: A comparison between modal parameters of walking, running and sprinting foot. In: Proceedings of TMM 2012. Springer. (Submitted)

Noroozi, S., Sewell, P., Khandan, R. and Vinney, J., 2012. An Empirical Model of Ribbed Cylindrical Glass Reinforced Plastic Tanks. Applied Mechanics and Materials. (In Press)

Noroozi, S., Vinney, J. and Sewell, P., 2012. Investigation of bolt group configurations on load distribution and joint failure. Mechanics of Advanced Materials and Structures. (In Press)

Noroozi, S., Sewell, P., Vinney, J., Dyer, B. T.J., Rahman, A. G. A. and Zhi Chao, O., 2012. Modal analysis of composite prosthetic energy-storing-and-returning feet: an initial investigation. Proceedings of the Institution of Mechanical Engineers Part P: Journal of Sports Engineering and Technology. (In Press)

Noroozi, S., Sewell, P., Rahman, A. G. A., Vinney, J., Zhi Chao, O. and Dyer, B. T.J., 2011. Performance Enhancement of Bi-lateral Lower-limb Amputees in the Latter Phases of Running Events: an initial investigation. Proceedings of the Institution of Mechanical Engineers Part P: Journal of Sports Engineering and Technology. (Submitted)

Nolan, D., Labeed, F. and Wood, D. E., 2008. Stability testing of modified wheelchairs in a clinical environment. In: 2008 IPEM Annual Scientific Meeting, 2-4 September 2008, Bath, England, pp. 29-30.

North, A., Polkinghorne, M. and Burns, R.S., 1995. Application of Taguchi for the design of manufacturing machines. In: Stockton, D. and Wainwright, C., eds. Advances in Manufacturing Technology IX: Proceedings of the 11th National Conference on Manufacturing Research. London: Taylor and Francis, pp. 509-514.

North, A., Polkinghorne, M. and Burns, R.S., 1995. Robust design of manufacturing machines using the Taguchi approach. In: Proceedings of the International Conference on Competitive Manufacturing, Cork, 6-8 September 1995. International Conference on Competitive Manufacturing, pp. 621-627.

P

Pan, J., Chang, J., Yang, X., Zhang, J., Qureshi, T., Howell, R.D. and Hickish, T. F., 2010. Graphic and haptic simulation system for virtual laparoscopic rectum surgery. The International Journal of Medical Robotics and Computer Assisted Surgery, 7 (1).

Popirlan, C.-I. and Dupac, M., 2009. A Mobile Agents Approach for searching Robots Virtual Reality Modeling and Simulation. In: Proceedings of the 20th IASTED International Conference on Modelling and Simulation MS 2009. Anaheim, CA, USA : ACTA Press, pp. 123-129.

Popirlan , C.-I. and Dupac, M., 2009. An Optimal Path Algorithm for Autonomous Searching Robots. Annals of University of Craiova - Mathematics and Computer Science Series, 36 (1), pp. 37-48.

Popirlan, C.-I. and Dupac, M., 2008. Mobile Agent Virtual Reality Modeling of Searching Robots. Annals of University of Craiova - Mathematics and Computer Science Series, 35, pp. 139-148.

Popirlan, C.-I. and Dupac, M., 2008. A web-base approach for 3D mechanism components generation and visualization. In: De Felice, F., ed. Proceedings of the 17th IASTED International Conference on Applied Simulation and Modelling, ASM 2008. Calgary, Canada: ACTA Press.

Popirlan, C.-I. and Dupac, M., 2008. A web-visualization approach for 3D elastic medium modeling and simulation. In: Proceedings of the 19th IASTED International Conference on Modelling and Simulation. Anaheim, CA, USA : ACTA Press , pp. 322-327.

Puta, M. and Dupac, M., 1997. Mechanical Integrators, Poisson Integrators. In: The Seminar of Geometry and Topology, 1997, West University of Timisoara, Romania. West University of Timisoara: The Seminar of Geometry and Topology, pp. 1-30.

Polkinghorne, M., 1997. Understanding fuzzy logic: Distance Learning Tutorial Training Manual. Manual. Plymouth, England: University of Plymouth.

Polkinghorne, M., Burns, R.S. and Baldwin, M., 1996. An FMEA approach to risk assessment to conform with the EC machinery directive. In: Proceedings of the Institute of Measurement and Control Symposium on Risk Management in a Regulated Environment, London 1996. Institute of Measurement and Control Symposium.

Pleydell, M. E., 1986. The application of laser doppler technique to vibration measurement and position control. PhD Thesis (PhD). Dorset Institute of Higher Education.

R

Romouzy Ali, A. M, Noroozi, S., Sewell, P. and Humphries-Smith, T., 2012. The Barriers Hindering Rapid Prototyping Deployment within Small and Medium-Sized Enterprises: Which Should Come First? In: Twelfth International Conference on Knowledge, Culture and Change Management, 6-8 July 2012, Chicago, USA. (Submitted)

Ramazani, M., Noroozi, S., Koohgilani, M., Cripps, B. and Sewell, P., 2012. Determination of static pressure loads on a marine composite panel from strain measurements utilising artificial neural networks. Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment. (In Press)

Rahman, A. G. A., Noroozi, S., Dupac, M., Al-Attas, S. M. S. M. and Vinney, J., 2012. A hybrid approach for non-destructive assessment and design optimisation and testing of in service machinery. Nondestructive Testing and Evaluation. (In Press)

Rahman, A. G. A., Noroozi, S. and Yee Khoo, S., 2011. Impact force identification from known acceleration responses using Gaussian Elimination with Partial Pivoting Inverse Technique. Mechanical Systems and Signal Processing. (Submitted)

Reynolds, T., 2010. First Contact Emotional Responses to Products. In: When Design Education and Design Research meet. EPDE 10: 12th International Conference on Engineering and Product Design Education. Institution of Engineering Designers and Design Society.

Reynolds, T., 2010. Researching First Contact Emotional Responses to Products. In: 12th International Conference on Engineering and Product Design Education, 2-3 September 2010, Trondheim, Norway. (Unpublished)

Roushan, G. and Sahandi, R., 2000. The Management Challenge of E-Business. In: BITWorld 2000 Conference, 1-3 June 2000, Universidad Iberoamericana, Santa Fe, México City.

Richards, D. and McDougall, S., 1999. Road traffic signs: how implicit category knowledge improves learning. In: Harris, D., ed. Engineering Psychology and Cognitive Ergonomics: Transportation Systems, Medical Ergonomics and Training. Ashgate Publishing Ltd, pp. 329-336.

S

Saeed, A., Khan, Z. A. and Hadfield, M., 2012. Corrosion resistance evaluation of coatings within large vehicles through prohesion testing. In: ASME STLE 2012 Joint Tribology International Conference, 7-10 Oct 2012, Denver, Colorado. (Submitted)

Saeed, A., Khan, Z. A., Hadfield, M. and Smith, R., 2012. Surface and Near Surface Material Characterisation of M10, A Historic Military Tank Destroyer. In: STLE 2012 Annual Meeting & Exhibition, 6-10 May 2012, St. Louis, MO, USA. (Submitted)

Schroeder, J. W., Dubey, V. N., Hickish, T. F. and Cole, J., 2012. Wearable Electrocutaneous Feed-back System: A Smart Device to Compensate for Sensation Loss. In: Design of Medical Devices, 10-12 April 2012, Minneapolis, Minnesota, USA. (Submitted)

Sahandi, R., Sewell, P., Noroozi, S. and Hewitt, M., 2012. Remote Monitoring of Lower-Limb Prosthetic Socket fit using Wireless Technologies. Journal of Medical Engineering & Technology, 36 (1), pp. 43-49.

Steg, L., Van den Berg, A. and De Groot, J.I.M., 2012. Introduction in environmental psychology. In: Steg, L., Van den Berg, A. and De Groot, J.I.M., eds. Environmental psychology: An introduction. Oxford: Blackwell, pp. 1-12.

Sewell, P., Noroozi, S., Vinney, J., Amali, R. and Andrews, S., 2012. Static and dynamic load prediction for prosthetic socket fitting assessment utilising an inverse problem approach. Artificial Intelligence in Medicine, 54, pp. 29-41.

Saeed, A., Khan, Z. A., Hadfield, M. and Smith, R., 2011. Conservation and Durability of The Tank Museum Artefacts. In: Cultural Heritage meets Science: The Interface, 14 September 2011, Mary Rose Trust Museum, Portsmouth, England. (Unpublished)

Saeed, A., Khan, Z. A., Nel, M. and Smith, R., 2011. Non destructive material characterisation and material loss evaluation in large historic military vehicles. Insight - Non-Destructive Testing and Condition Monitoring, 53 (7), pp. 382-386.

Schroeder, J. W., Dubey, V. N., Hickish, T. F. and Cole, J., 2011. Electrocutaneous feedback system to improve the estimation of pressure applied to the foot. In: International Conference on Biomedical Electronics and Devices (BIODEVICES 2011), 26-29 January 2011, Rome, Italy.

Saeed, A., Khan, Z. A., Hadfield, M. and Smith, R., 2011. Abstract: The effects of fretting corrosion on the durability of drivetrain in large in-use historic vehicles. In: STLE 66th Annual Meeting & Exhibition, 15-19 May 2011, Atlanta, GA, USA, Proceedings. STLE, p. 73.

Sahandi, R., Roushan, G. and Heaslip, V., 2010. Remote patient monitoring to improve patient care on general hospital wards. Scope: Journal of the Institute of Physics and Engineering in Medicine, pp. 8-12.

Saeed, A. and Khan, Z. A., 2010. Corrosion mapping of historic military vehicles using the TD Focus-Scan. ndtnews.

Saeed, A., Khan, Z. A., Clark, M., Nel, M. and Smith, R., 2010. An Experimental Study of Material Loss Through Corrosion in Historic Military Vehicles. Corrosion Science. (Submitted)

Sewell, P., 2010. Teaching engineering at Bournemouth University. Impact: the voice of consultancy and engineering (34), p. 15.

Sahandi, R., 2010. Is wireless the answer? Hospital Information Technology Europe, 3 (3), pp. 18-21.

Saeed, A., Khan, Z. A., Garland, N. P. and Smith, R., 2010. Material characterisation to understand various modes of corrosion failures in large military vehicles of historical importance. In: Fifth International Conference on Computational Methods and Experiments in Materials Characterisation , 13-15 June 2011, Kos, Greece. (Submitted)

Sewell, P., Noroozi, S., Vinney, J., Amali, R. and Andrews, S., 2010. Improvements in the Accuracy of an Inverse Problem Engine's Output for the Prediction of Below-Knee Prosthetic Socket Interfacial Loads. Engineering Applications of Artificial Intelligence, 23 (6), pp. 1000-1011.

Sahandi, R., 2010. Evolution of Wireless Technology and Remote Patient Monitoring. In: Contemporary Issues in Computer and Information Science Conference, 1-3 June 2010, Zanjan University, Zanjan, Iran. (Unpublished)

Sewell, P., 2010. Enhancing Design students’ engagement in technology-based subjects: A practical learning and online assessment strategy. In: DEC E-learning seminar, 26 May 2010, Bournemouth University, England. (Unpublished)

Sewell, P., 2010. Enhancing design student’s engagement in technology-based subjects: A practical learning and online assessment strategy. In: Education Enhancement Conference 2010, 20 May 2010, Bournemouth University. (Unpublished)

Sahandi, R. and Liu, Y., 2010. Channel Overlap Problems of ZigBee Networks for Remote Patient Monitoring on General Hospital Wards. In: International Conference on Communications and Mobile Computing (CMC 2010), 12-14 April 2010, Shenzhen, China.

Sahandi, R., 2010. Electronic Admission and Monitoring System for Patients. In: Confenis, International Advanced Symposium on Enterprise Integration and Information Architecture, 10-11 March 2010, Kish, Iran.. (Unpublished)

Sahandi, R., Noroozi, S., Roushan, G., Heaslip, V. and Liu, Y., 2010. Wireless technology in the evolution of patient monitoring on general hospital wards. Journal of Medical Engineering & Technology, 34 (1), pp. 51-63.

Staelens, Y. and Morris, D., 2010. Crossing the Line - sustainability and large object conservation in musuems and heritage collections. In: Amoêda, R., Lira, S. and Pinheiro, C., eds. Heritage 2010. Barcelos, Portugal: Greenlines Institute, pp. 1183-1191.

Sebastian, S. d. S. M., Hadfield, M. and Khan, Z. A., 2009. Rolling Contact Fatigue Test in A Modified 4-Ball Test Machine. In: Society of Tribologists and Lubrication Engineers (STLE) 64th Annual Meeting and Exhibition, 17-21 May 2009, Coronado Springs Resort, FL, USA, p. 167.

Soetendorp, R., Childs, B., Roach, J. and Maclaughlan, R., 2005. Engineering enterprise through intellectual property education - pedagogic approaches. WSEAS Transactions on Advances in Engineering Education, 4 (2), pp. 359-367.

Sewell, P., Vinney, J. and Noroozi, S., 2005. New methods to improve the assessment, analysis and quality of prosthetic socket fit (Remedi Research Report). Project Report. University of the West of England, Bristol. (Unpublished)

Smith, A. A. W., 2004. Identification and tracking of marine objects for collision risk estimation. PhD Thesis (PhD). Bournemouth University.

Swain, I. D. and Bader, D., 2002. The measurement of interface pressure and its role in soft tissue breakdown. Journal of Tissue Viability, 12 (4), pp. 132-146.

Soetendorp, R., 2002. IPR awareness - an enterprise skill for engineers. In: Australian Association of Engineering Education, 2002, Canberra, Australia. (Unpublished)

Soetendorp, R., 2002. Influence of engineering professional bodies in the curriculum. In: EAEEIE 13th Annual International Conference on Engineering Education, 8-10 April 2002, York. (Unpublished)

Sheppard, T., 1999. Extrusion of aluminium alloys. Dordrecht: Kluwer Academic Publishers.

Safari, S. and Hadfield, M., 1998. Wear Behaviour of the Piston/Gudgeon Pin in a Hermetic Compressor with Replacement CFC Refrigerants. Wear, 219 (1), pp. 8-15.

Sahandi, R. and Roushan, G., 1998. Multimedia in Education: Creating an Interactive Distributed Learning Environment. In: The 3rd International Conference on Multimedia Engineering and Education, 7-9 July 1998, City University, Hong Kong.

Sahandi, R., Vine, D. S. G. and Longster, J. A., 1998. Text-to-Visual Speech Synthesis. Informatica, Special issue: NLP & Multi-Agent Systems, 22 (4), pp. 445-450.

Sahandi, R. and Vine, D. S. G., 1997. A Concatenation Framework for Test-to-Speech Synthesis using CVC Syllables. In: Speech and Language Technology Speech and Language Technology (SALT) Club Workshop on Evaluation in Speech and Language Technology, 17-18 June 1997, Halifax Hall, University of Sheffield, Sheffield, UK.

Sahandi, R. and Vine, D. S. G., 1997. Text-to-Speech and Animation for Knowledge Transfer. In: KT ’97: International Conference on Knowledge Transfer, July 1997, London.

Safari, S. and Hadfield, M., 1997. Wear Behaviour of the Piston/Gudgeon Pin in a Hermetic Compressor with Replacement CFC Refrigerants. In: World Tribology Congress, 8-12 September 1997, London, p. 349.

T

Tzanakis, I., Hadfield, M., Georgoulas, A. and Kotsovinos, N., 2011. Evaluation of flash temperatures of a composite elastomer with dry sliding conditions in contact with high carbon steel. In: 10th International Conference: Surface Effects and Contact Mechanics: Computational Methods and Experiments, 21 - 23 September 2011 , Malta. (Unpublished)

Thomas, B., Hadfield, M. and Austen, S., 2011. Increasing Durability Performance of Lifeboat Launch Slipway Panels. Journal of Naval Architecture and Marine Engineering. (Submitted)

Torres Perez, A., 2011. Tribological assessment of oil condition sensors for marine launching equipment. PhD Thesis (PhD). Bournemouth University.

Tzanakis, I., Hadfield, M., Henshaw, I., Garland, N. P. and Khan, Z. A., 2011. Experimental sliding performance of composite tip seal with high carbon steel plate under lubricated conditions applied to scroll expander systems. Tribology Transactions, 54 (4), pp. 505-513.

Thomas, B., Hadfield, M. and Austen, S., 2010. Alternative Lifeboat Slipway Bearing Materials. In: Leeds-Lyon Symposium on Tribology 2010, 07-10 September 2010, Leeds Trinity University College, The University of Leeds, UK. (Submitted)

Thomas, B., Hadfield, M. and Austen, S., 2010. Sustainable Design of Lifeboat Slipway Launches. In: 37th Leeds-Lyon Symposium on Tribology. Tribology for Sustainability: Economic, Environmental and Quality of Life, 7-10 September 2010, Trinity and All Saints College, The University of Leeds, England. (Submitted)

Thomas, B., Hadfield, M. and Austen, S., 2010. Alternative Lining Material Testing for Lifeboat Slipways. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. (Submitted)

Thomas, B., Hadfield, M. and Austen, S., 2010. Wear and Friction Modeling on Lifeboat Launch Systems. Tribology Transactions, 53 (4), pp. 584-599.

Torres Perez, A., Hadfield, M. and Austen, S., 2010. On-line Ferrous Debris Density monitoring in sliding area contacts under boundary lubrication regime. In: The Seventh International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 22-24 June 2010, Ettington Chase, Stratford-upon-Avon, England.. (Submitted)

Tzanakis, I., Hadfield, M. and Kotsovinos, N., 2010. Cavitation damage observations within scroll expander lubrication systems. In: Third International Conference on Tribology and Design, 11-13 May 2010, Algarve, Portugal. (In Press)

Tzanakis, I., Hadfield, M., Khan, Z. A. and Garland, N. P., 2010. An experimental study of refrigerant lubricated sliding contact between the main components of a scroll expander system. In: Third International Conference on Tribology and Design, 11-13 May 2010, Algarve, Portugal. (Unpublished)

Tzanakis, I. and Hadfield, M., 2010. Observations of acoustically generated cavitation bubbles within typical fluids applied to a scroll expander lubrication system. Journal of Hydrodynamics. (Submitted)

Thomas, B., Hadfield, M. and Austen, S., 2010. Wear and Friction performance of lifeboat launch slipways. In: Third International Conference on Tribology and Design, 11-13 May 2010, Algarve, Portugal. (Unpublished)

Thomas, B., 2009. Discussion: Experimental wear modelling of lifeboat slipway launches. Tribology International, 42 (11-12), pp. 1862-1863.

Thomas, B., Hadfield, M. and Austen, S., 2009. Experimental Wear Modelling of Lifeboat Slipway Launches. Tribology International, 42 (11-12), pp. 1706-1714.

Thomas, B., Hadfield, M. and Austen, S., 2009. Wear Mechanisms applied to Lifeboat Slipway Launches. Wear, 267 (11), pp. 2062-2069.

Thomas, B., 2009. Friction and Wear Performance of Lifeboat Launch Slipways. PhD Thesis (PhD). Bournemouth University.

Tzanakis, I., Hadfield, M. and Khan, Z. A., 2009. Durability of domestic scroll compressor systems. In: De Hosson, J.T.N. and Brebbia, C.A., eds. Surface effects and contact mechanics IX : computational methods and experiments. Southampton, UK: WIT, pp. 229-240.

Tzanakis, I., Hadfield, M. and Khan, Z. A., 2009. Durability of domestic scroll compressor systems. Surface Effects and Contact Mechanics IX - Computer Methods and Experiments; International Conference Proceedings, 62, pp. 229-240.

Thomas, B., 2008. Sustainable Design of Lifeboat Slipways. In: 35th Leeds-Lyon Symposium on Tribology “Duncan Dowson at 80”, 9-12 September 2008, Trinity and All Saints College, The University of Leeds, England.

Thomas, B., 2008. Wear Mechanisms applied to Lifeboat Slipway Launches. In: 1st International Conference on Abrasive Processes, 21-25 September 2008, Churchill College, Cambridge.

Thomas, B., Hadfield, M. and Austin, S., 2008. Experimental Wear Modelling of Lifeboat Slipway Launches. Paper XXVIII(VI). In: 35th Leeds-Lyon Symposium on Tribology “Duncan Dowson at 80”, 9-12 September 2008, Trinity and All Saints College, The University of Leeds, England.

Thomas, B., Hadfield, M. and Austin, S., 2008. Wear Mechanisms Applied to Lifeboat Slipway Launches. In: 1st International Conference on Abrasive Processes, 21-25 September 2008, Churchill College, Cambridge.

Taylor, P.N., Kenney, L., Mann, G.E., Wood, D. E. and Hobby, J., 2006. Evaluation of the safety and efficacy of an implanted neuromuscular stimulator for correction of dropped foot. In: 1st UK Stroke Forum Conference, 7-8 December 2006, Harrogate, England.

Thomas, B., 2005. Sustainable Design of Lifeboat Slipways. In: Reception for Younger Engineers at the House of Commons, 6 December 2005, Portcullis House, Westminster, London.

Thomas, B., 2004. Minimising Impact: How legislation and sustainable design can reduce the environmental cost of a mobile phone. Masters Thesis (Masters). Bournemouth University.

Taylor, P.N., Esnouf, J. and Hobby, J., 2002. The functional impact of the Freehand system on tetraplegic hand function - Clinical results. Spinal Cord, 40 (11), pp. 560-566.

Taylor, P.N., Tromans, A.M., Harris, K.R. and Swain, I. D., 2002. Electrical stimulation of abdominal muscles for control of blood pressure and augmentation of cough in a C3/4 level tetraplegic. Spinal Cord, 40 (1), pp. 34-36.

Taylor, P.N., Esnouf, J. and Hobby, J., 2001. Pattern of use and user satisfaction of the NeuroControl Freehand System. Spinal Cord, 39 (3), pp. 156-160.

Tang, Z.Y., You, L.H. and Shi, C.H., 1990. Optimisation design of hydraulic directional valves with pneumatic control. In: International Conference on Fluid and Robotics, 1990, China.

V

Vaughan, N., Dubey, V. N., Wee, M.Y.K. and Isaacs, R., 2012. Measuring Tuohy Needle Insertion Force on a Porcine Spine. In: 6th International Conference on Bioinformatics and Biomedical Engineering (iCBBE 2012), 17-20 May 2012, Shanghai, China. (Submitted)

Vaughan, N., Dubey, V. N., Wee, M.Y.K. and Isaacs, R., 2012. Advanced Epidural Simulator with 3D Flexible Spine and Haptic Interface. In: Design of Medical Devices, 10-12 April 2012, Minneapolis, Minnesota, USA. (Submitted)

Vaughan, N., Dubey, V. N., Wee, M. Y. K. and Gabrys, B., 2011. Simulating Epidural Injection: A virtual patient for training. In: SET for Britain, 14 March 2011, House of Commons, London.

Vinney, J., Noroozi, S., Rahman, A. G. A., Sewell, P., Zhi Chao, O., Kuan, K. K. and Dupac, M., 2011. Analysis of Composite Prosthetic Energy-Storing-and-Returning (ESR)feet: A comparison between FEA and the experimental analysis. International Journal of COMADEM. (Submitted)

Vali-Shariatpanahi, S., Noroozi, S. and Vinney, J., 2010. Evaluation of in-plane shear failure in composite laminate with high percentage of 90o plies. In: 18th Annual International Conference on COMPOSITES/NANO ENGINEERING (ICCE -18), 4-10 July 2010, Anchorage, Alaska,USA,. (Unpublished)

Voles, P., 2005. Feature-based object tracking in maritime scenes. PhD Thesis (PhD). Bournemouth University.

Vine, D. S. G. and Sahandi, R., 2000. Synthesis of Emotional Speech using RP-PSOLA. In: IEE Seminar on the State of the Art in Speech Synthesis, 13 April 2000, London.

Vine, D. S. G. and Sahandi, R., 2000. Synthesising of Emotional Speech by concatenating Multiple Pitch Recorded Speech Units. In: ISCA Workshop on Speech and Emotion: A Conceptual Framework for Research, 5-7 September 2000, Belfast, Northern Ireland.

Vine, D. S. G., Sahandi, R. and Longster, J. A., 1999. Recording Concatenative Units for Speech Synthesis using a Reference Pitch Prompt. In: International Workshop: Speech and Computer (SPECOM'99), October 1999, Moscow, Russia.

Vine, D. S. G., Longster, J. A. and Sahandi, R., 1999. Reference Pitch Prompting: A Recording Method For Concatenative Speech Synthesis. In: IEE Colloquium on Interactive Spoken Dialogue Systems for Telephony Applications, 3 November 1999, London.

Vine, D. S. G. and Sahandi, R., 1998. An Evaluation of Naturalness in Time-Domain Concatenative Speech Synthesis. In: The Speech and Hearing Conference, November 1998, Windermere, Cumbria, UK..

W

Wang, M., Jens, K., Chang, J. and Zhang, J. J., 2011. Relief stylization from 3D models using featured lines. In: SCCG 2011, pp. 63-68.

Wang, W., 2010. Rolling contact fatigue of silicon nitride. PhD Thesis (PhD). Bournemouth University.

Wang, M., Chang, J. and Zhang, J. J., 2010. A review of digital generation techniques. In: The 2nd International Conference on Computer Engineering and Technology (ICCET 2010), 16 - 18 April 2010, Chengdu, Sichuan, China. (Unpublished)

Wang, M., Chang, J., Pan, J. and Zhang, J. J., 2010. Image-based bas-relief generation with gradient operation. In: The Eleventh IASTED International Conference on Computer Graphics and Imaging, 17-19 February 2010, Innsbruck, Austria.

Wani, M.F., Khan, Z. A. and Hadfield, M., 2010. Effect of sintering additives and reinforcement on microhardness values of Si3N4 Ceramics and Composites. Journal of Advanced Research in Mechanical Engineering, 1-2010 (1), pp. 52-59.

Wang, W., Wereszczak, A.A. and Hadfield, M., 2010. Surface Strength of Silicon Nitride in Relation to Rolling Contact Performance on Ball-on-Rod and Modified Four-Ball Tests. Tribology International, 43 (1-2), pp. 423-433.

Wang, M., Lv, H., Chang, J. and Zhang, J. J., 2010. Implementation of CUDA-based loop mesh subdivision. In: 2010 3rd International Conference on Computer and Electrical Engineering, 16-18 Nov 2010, Chengdou, China.

Wang, W., Hadfield, M. and Wereszczak, A.A., 2009. Surface Strength of Silicon Nitride in Relation to Rolling Contact Performance. Ceramics International, 35 (8), pp. 3339-3346.

Wood, D. E., 2009. Clinical use of FES in neurorehabilitation - invited workshop at the Technology in Rehabilitation exhibition. In: Irish Society of Chartered Physiotherapists – Chartered Physiotherapists in Neurology and Gerontology Annual Meeting, May 2009, Tallaght, Ireland. (Unpublished)

Wood, D. E., 2009. Clinical use of FES in neurorehabilitation. In: BAPO Annual Conference, 27-29 March 2009, Bolton, England. (Unpublished)

Wood, D. E., 2006. One foot in front of each other (invited talk). In: RAATE Conference, November 2006, Birmingham, England.

Wood, D. E., 2006. One foot in front of each other. In: RAATE 2006 Conference - Recent Advances in Assistive Technology and Engineering, November 2006, Birmingham, England. (Unpublished)

Wood, D. E., Burridge, J.H., Van Wijck, F.M., McFadden, C., Hitchcock, R.A., Pandyan, A.D., Haugh, A., Salazar-Torres, J.J. and Swain, I. D., 2005. Biomedical approaches applied to the lower and upper limb for the measurement of spasticity: a systematicv review of the literature. Disability and Rehabilitation, 27 (1/2), pp. 19-32.

Woodhead, R., Ball, F. and Li, X., 2004. Silk flowers are just as artificial as plastic ones: value engineering in the university context. European Journal of Engineering Education, 29 (3), pp. 333-349.

Wang, Y. and Hadfield, M., 2003. Failure modes of ceramic rolling elements with surface crack defects. Wear, 256 (1-2), pp. 208-219.

Wang, Y. and Hadfield, M., 2003. A mechanism for nucleating secondary fractures near a pre-existing flaw subjected to contact loading. Wear, 254 (7-8), pp. 597-605.

Wang, Y. and Hadfield, M., 2002. A study of line defect fatigue failure of ceramic rolling elements in rolling contact. Wear, 253 (9-10), pp. 975-985.

Wang, Y. and Hadfield, M., 2001. Ring crack propagation in silicon nitride under rolling contact. Wear, 250 (1-12), pp. 289-292.

Wang, Y., 2001. Failure modes of silicon nitride rolling elements with ring crack defects. PhD Thesis (PhD). Bournemouth University.

Wang, Y. and Hadfield, M., 2000. The influence of ring crack location on the rolling contact fatigue failure of lubricated silicon nitride: experimental studies. Wear, 243 (1-2), 157 - 166 .

Wang, Y. and Hadfield, M., 2000. The influence of ring crack location on the rolling contact fatigue failure of lubricated silicon nitride: fracture mechanics analysis. Wear, 243 (1-2), pp. 167-174.

Wang, Y. and Hadfield, M., 1999. Rolling Contact Fatigue Failure Modes of Lubricated Silicon Nitride in Relation to Ring Crack Defects. Wear, 225-22 (2), pp. 1284-1292.

Wood, R., Polkinghorne, M., Grieve, D. and Burns, R.S., 1998. Implications of machine force testing to the product design process. In: IMC 15: Proceedings of the Fifteenth Conference of the Irish Manufacturing Committee, Ulster , 1998. University of Ulster , pp. 223-232.

Wilson, A. and Polkinghorne, M., 1997. Implications of electromagnetic compatibility for product manufacture in the factory environment. In: International Conference on Factory 2000: Technology Exploitation Process, Cambridge, 1997. Institution of Engineering and Technology, pp. 240-246. (Unpublished)

Y

You, L.H., Chang, J., Yang, X. and Zhang, J. J., 2011. Solid modelling based on sixth order partial differential equations. Computer-Aided Design, 43 (6), pp. 720-729.

You, L.H., Long, S.Y. and Rohr, L., 1999. Elastic-plastic stress field in a coated continuous fibrous composite subjected to thermo-mechanical loading. Journal of Applied Mechanics, 66 (3), pp. 750-757.

You, L.H. and Long, S.Y., 1998. Effects of material properties of interfacial layer on stresses in fibrous composites subjected to thermal loading. Composites Part A: Applied Science and Manufacturing, 29 (9-10), pp. 1185-1192.

You, L.H., Zhang, J. J., Wu, H.B. and Sun, R.B., 1998. A numerical approach for the analysis of the body of dry gas holders under gas pressure based on the theory of orthotropic plates. In: 3rd Biennial World Conference on Integrated Design & Process Technology (IDPT), Berlin, Germany. IDPT.

You, L.H., Wu, H.B. and Sun, R.B., 1998. A series method for calculating the body of dry gas holders under gas pressure. Journal of the International Association for Shell and Spatial Structures, 39 (1), pp. 15-24.

You, L.H., Wu, H.B. and Sun, R.B., 1997. Post-buckling of rectangular plates with arbitrary combinations of edges simply supported, clamped and elastically restrained against rotation. In: 3rd EUROMECH Solid Mechanics Conference, 18-22 August 1997, Stockholm, Sweden.

You, L.H., Wu, H.B. and Sun, R.B., 1997. A simplified calculation method of wall plates of dry gas holders under gas pressure. International Journal of Pressure Vessels and Piping, 74 (1), pp. 13-18.

You, L.H., Yao, S.P., Wei, X.M., He, X.B. and Hong, L.S., 1992. Research on crane booms with the lightest weight. In: First World Conference on Constructional Steel Design, 6-9 December 1992, Mexico.

You, L.H., Wu, H.B., Sun, R.B. and Wang, D.Y., 1991. Analytic solutions of body of MAN’s dry gas holders under internal pressure based on theories of stiffened plates. In: Proceedings of International Conference on Steel and Aluminium Structures 1991. International Conference on Steel and Aluminium Structures.

You, L.H., Wu, H.B., Sun, R.B. and Wang, D.Y., 1991. Series solution of body of MAN’s dry gas holders subjected to internal pressure. In: Proceedings of International Symposium on Concrete Engineering. International Symposium on Concrete Engineering.

Z

Zhi Chao, O., Rahman, A. G. A., Ismail, Z and Noroozi, S., 2012. Study of open crack in rotor shaft using changes in Frequency Response Function (FRF) phase. Structural Control and Health Monitoring. (Submitted)

Zhao, P., 2006. Three-dimensional boundary element and experimental analysis of lubricant ceramic surface ring cracks in rolling contact. PhD Thesis (PhD). Bournemouth University.

Zhao, P., Hadfield, M., Wang, Y. and Vieillard, C., 2005. Subsurface propagation of partial ring cracks under rolling contact: Part II. Fracture mechanics analysis. Wear, 261 (3-4), pp. 390-397.

Zhao, P., Hadfield, M., Wang, Y. and Vieillard, C., 2004. The influence of test lubricants on the rolling contact fatigue failure mechanisms of silicon nitride ceramic. Wear, 257 (9-10), pp. 1047-1057.

Zhen, P. J. and Khan, Z. A., 2000. Pressure Vessel Materials: Handbook. 1. Beijing, PR China: Industrial Equipment and Information Engineering Centre.