Items where Subject is "Technology > Engineering > General Engineering"

Up a level
Export as [feed] RSS 1.0 [feed] Atom [feed] RSS 2.0
Group by: Creators Name | Item Type | No Grouping
Number of items at this level: 71.


Humphries-Smith, T. and Adrian, A., 2012. Intellectual Property Education – Thinking outside the Box meets Colouring within the Lines. International Journal of Learning & Intellectual Capital, 9 (3), pp. 337-350.

Sewell, P., 2010. Teaching engineering at Bournemouth University. Impact: the voice of consultancy and engineering (34), p. 15.

Thomas, B., Hadfield, M. and Austen, S., 2010. Wear and Friction Modeling on Lifeboat Launch Systems. Tribology Transactions, 53 (4), pp. 584-599.

Humphries-Smith, T., 2010. Several Shades of Green - do you do eco-design or sustainable design or neither. Engineering Designer, pp. 10-12.

Dubey, V. N., 2010. Photoelasticity revived for Tactile Sensing. Dimensions: The newsletter from the British Society for Strain Measurement (Januar), p. 8.

Fatjo, G., Hadfield, M., Vieillard, C. and Sekulic, J., 2009. Early Stage Cavitation Erosion within Ceramics: An Experimental Investigation. Ceramics International, 35 (8), pp. 3301-3312.

Thomas, B., Hadfield, M. and Austen, S., 2009. Experimental Wear Modelling of Lifeboat Slipway Launches. Tribology International, 42 (11-12), pp. 1706-1714.

Thomas, B., Hadfield, M. and Austen, S., 2009. Wear observations applied to Lifeboat Slipway Launches. Wear, 267 (11), pp. 2062-2069.

Grant-Braham, B., 2009. We're Racing Green: Environmental Motor Sport @ BU. Talbot magazine, 11.

Dubey, V. N., 2009. Do it like a robot. Packaging Today, pp. 10-11.

Garland, N. P., Hadfield, M., Howarth, G. and Middleton, D., 2009. Investment in Sustainable Development: A UK Perspective on the Business and Academic Challenges. Sustainability, 1 (4), pp. 1144-1160.

Dubey, V. N. and Grewal, G. S., 2009. Load estimation from photoelastic fringe patterns under combined normal and shear forces. Journal of Physics: Conference Series, 181 (012074).

de Eyto, A., McMahon, M., Hadfield, M. and Hutchings, M., 2008. Strategies for Developing Sustainable Design Practice for Students and SME Professionals. European Journal of Engineering Education, 33 (3), pp. 331-342.

Grewal, G. S. and Dubey, V. N., 2007. Inverse problem of photoelastic fringe mapping using neural networks. Measurement Science and Technology, 18, pp. 1361-1366.

Soetendorp, R., Childs, B., Roach, J. and Maclaughlan, R., 2005. Engineering enterprise through intellectual property education - pedagogic approaches. WSEAS Transactions on Advances in Engineering Education, 4 (2), pp. 359-367.

Dubey, V. N., Crowder, R. M. and Chappell, P., 1999. Optimal object grasp using Tactile sensors and fuzzy logic. Robotica, 17 (6), pp. 685-693.

Gabrys, B. and Bargiela, A., 1999. Analysis of Uncertainties in Water Systems Using Neural Networks. Measurement + Control, 32 (5), pp. 145-147.

Book Section

Humphries-Smith, T. and Glasspool, C. R., 2012. Final Year Induction - Re-engagement and Re-motivation. In: Baelus, C., Buck, L., De Grande, G., Frateur, G., Grace, J. and Ion, B., eds. E&PDE2012: Design education for future wellbeing. Antwerp, Belgium: Design Soceity & Institution of Engineering Designers. (Submitted)

King, R. D., Schierz, A. C., Clare, A., Rowland, J., Sparkes, A., Nijssen, S. and Ramon, J., 2010. Inductive queries for a drug designing robot scientist. In: Dzeroski, S., Goethals, B. and Panov, P., eds. Inductive Databases and Constraint-Based Data Mining. Springer, pp. 421-451.

Garland, N. P., Khan, Z. A. and Parkinson, B., 2010. Sustainable development for design engineering students: a peer assisted problem based learning approach. In: Boks, C., McMahon, C., Ion, W and Parkinson, B., eds. When Design Education and Design Research meet. EPDE 10: 12th International Conference on Engineering and Product Design Education. Glasgow, United Kingdom: The Design Society, pp. 370-375.

Humphries-Smith, T. and Steiner, S., 2010. Engineering Our World Towards a Sustainable Future. In: Jones, P., Selby, D. and Sterling, S., eds. Sustainability Education - Perspectives and Practice Across Higher Education. London: Earthscan.

Staelens, Y. and Morris, D., 2010. Crossing the Line - sustainability and large object conservation in musuems and heritage collections. In: Amoêda, R., Lira, S. and Pinheiro, C., eds. Heritage 2010. Barcelos, Portugal: Greenlines Institute, pp. 1183-1191.

Humphries-Smith, T., 2009. Collaborative Student Centred Learning: Intellectual Property for Product Designers. In: EPDE2009: Creating a Better World. International Conference on Engineering and Product Design Education. University of Strathclyde: The Design Society and IED, pp. 49-54.

Conrad, F. and Humphries-Smith, T., 2009. The Development of an On-Line Learning and Teaching Resource for the Socio-Centric Aspects of Sustainable Design. In: EPDE2009: Creating a Better World. International Conference on Engineering and Product Design Education. Unviersity of Strathclyde: The Design Society and IED, pp. 122-127.

Hunt, C. and Reynolds, T., 2009. The Significance of Purchasing Behavioural Characterisation on Sustainable Design Education of Students. In: McMahon, C., Hogarth, P. and Ion, B., eds. Creating a Better World -Proceedings of the 11th Engineering and Product Design Education Conference, University of Brighton, 10th-11th September 2009. Design Society/ Institution of Engineering Designers, pp. 402-408.

Kadlec, P. and Gabrys, B., 2009. Evolving on-line prediction model dealing with industrial data sets. In: 2009 IEEE Workshop on Evolving and Self-Developing Intelligent Systems Proceedings. Nashville: IEEE, pp. 24-31.

Dubey, V. N., 2009. Photoelastic Stress Analysis. In: Evans, J.E., Dulieu-Barton, J.M and Burguete, R.L., eds. Modern Stress and Strain Analysis A state of the art guide to measurement techniques. London: British Society for Strain Measurement and Eureka, pp. 10-11.

Gabrys, B. and Bargiela, A., 1997. Integrated Neural Based System for State Estimation and Confidence Limit Analysis in Water Networks. In: The 8th European Simulation Symposium, Ess 96. Society for Computer Simulation, pp. 398-402.


Humphries-Smith, T., 2010. Socio-centric Sustainable Design - the Development of a Learning Resource. Technical Report. London: Higher Education Academy Engineering Subject Centre.

Kanyaru, J.M. and Phalp, K. T., 2004. A Lightweight State Machine for Validating Use Case Descriptions. Technical Report. Bournemouth: ESERG.

Conference or Workshop Item

Saeed, A., Khan, Z. A. and Hadfield, M., 2012. Corrosion resistance evaluation of coatings within large vehicles through prohesion testing. In: ASME STLE 2012 Joint Tribology International Conference, 7-10 Oct 2012, Denver, Colorado. (Submitted)

Gibson, D. and Polfreman, R., 2011. An Architecture For Creating Hosting Plug- Ins For Use In Digital Audio Workstations. In: International Computer Music Conference 2011, 31 July - 5 August 2011, University of Huddersfield, England..

Thomas, B., Hadfield, M. and Austen, S., 2010. Alternative Lifeboat Slipway Bearing Materials. In: Leeds-Lyon Symposium on Tribology 2010, 07-10 September 2010, Leeds Trinity University College, The University of Leeds, UK. (Unpublished)

Torres Perez, A., Hadfield, M. and Austen, S., 2010. On-line Ferrous Debris Density monitoring in sliding area contacts under boundary lubrication regime. In: The Seventh International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 22-24 June 2010, Ettington Chase, Stratford-upon-Avon, England.. (Submitted)

Hadfield, M., Wang, W. and Wereszczak, A.A., 2010. Mechanical properties of silicon nitride using RUS & C-Sphere methodology. In: CIMTEC 2010: 12th International Ceramics Congress, 6-11 June 2010, Montecatini Terme, Tuscany, Italy. (Unpublished)

Sewell, P., 2010. Enhancing Design students’ engagement in technology-based subjects: A practical learning and online assessment strategy. In: DEC E-learning seminar, 26 May 2010, Bournemouth University, England. (Unpublished)

Wang, M., Chang, J. and Zhang, J. J., 2010. A review of digital generation techniques. In: The 2nd International Conference on Computer Engineering and Technology (ICCET 2010), 16 - 18 April 2010, Chengdu, Sichuan, China. (Unpublished)

Wang, M., Chang, J., Pan, J. and Zhang, J. J., 2010. Image-based bas-relief generation with gradient operation. In: The Eleventh IASTED International Conference on Computer Graphics and Imaging, 17-19 February 2010, Innsbruck, Austria.

Vali-Shariatpanahi, S., Noroozi, S. and Vinney, J., 2010. Evaluation of in-plane shear failure in composite laminate with high percentage of 90o plies. In: 18th Annual International Conference on COMPOSITES/NANO ENGINEERING (ICCE -18), 4-10 July 2010, Anchorage, Alaska,USA,. (Unpublished)

Agrawal, S.K., Dubey, V. N., Gangloff Jr., J.J., Brackbill, E.A. and Sangwan, V., 2009. Optimization and design of a cable driven upper arm exoskeleton. In: ASME 2009 International Design Engineering Technical Conference, 30 August- 2 September 2009, San Diego, California, USA.

Brackbill, E.A., Mao, Y., Agrawal, S.K., Annapragada, M. and Dubey, V. N., 2009. Dynamics and Control of a 4-dof Wearable Cable-driven Upper Arm Exoskeleton. In: IEEE ICRA2009: International Conference on Robotics and Automation, 12-17 May 2009, Kobe, Japan.

Chang, J., Zhang, J. J. and Rehan, Z., 2009. Fast Vehicle Crash Modelling for Games. In: IEEE First International Conference Games and Virtual Worlds for Serious Applications, 23-24 March 2009, Technocentre Coventry University, UK., pp. 141-147.

Thomas, B., 2008. Sustainable Design of Lifeboat Slipways. In: 35th Leeds-Lyon Symposium on Tribology “Duncan Dowson at 80”, 9-12 September 2008, Trinity and All Saints College, The University of Leeds, England.

Thomas, B., 2008. Wear Mechanisms applied to Lifeboat Slipway Launches. In: 1st International Conference on Abrasive Processes, 21-25 September 2008, Churchill College, Cambridge.

Khan, Z. A. and Hadfield, M., 2008. Wear of Rolling Bearing Materials with Refrigerant Lubrication. In: Society of Tribologists and Lubrication Engineers (STLE) 63rd Annual Meeting and Exhibition, 18-22 May 2008, Cleveland, Ohio, USA.

Liu, Y. and Sahandi, R., 2008. Review of sensors for remote patient monitoring. In: Sixth IASTED International Conference on Biomedical Engineering: BioMed 2008, 13-15 February 2008, Innsbruck, Austria, pp. 408-413.

McMahon, M. and Hadfield, M., 2007. The Butterfly Effect: Creative Sustainable Design Solutions through Systems thinking. In: The 16th International Conference on Flexible Automation and Intelligent Manufacturing: FAIM 2006, 26-28 June 2006, University of Limerick, Ireland, pp. 247-254.

Dubey, V. N. and Grewal, G. S., 2007. Photoelastic stress analysis under unconventional loading. In: ASME International Design Engineering Technical Conference, 4-7 September 2007, Las Vegas, Nevada, USA, pp. 525-530.

Dubey, V. N. and Grewal, G. S., 2007. Tactile whole-field imaging sensor on photoelasticity. In: ASME International Design Engineering Technical Conference, 4-7 September 2007, Las Vegas, Nevada, USA, pp. 339-345.

Dubey, V. N., Grewal, G. S. and Claremont, D. J., 2006. Extraction of load information from photoelastic images using neural networks. In: 2006 ASME International Design Engineering Technical Conferences & Computers and Information In Engineering Conference, 10-13 September 2006, Philadelphia, USA.

Dubey, V. N. and Crowder, R. M., 2005. Photoelasticity based dynamic tactile sensor. In: ASME International Design Engineering Technical Conference, 24-28 September 2005, Long Beach, California, USA, pp. 235-243.

Thomas, B., 2005. Sustainable Design of Lifeboat Slipways. In: Reception for Younger Engineers at the House of Commons, 6 December 2005, Portcullis House, Westminster, London.

Khan, Z. A., Hadfield, M. and Wang, Y., 2004. Design of a novel pressurized chamber to assess in-use durability performance of rolling contact elements using refrigerant lubrication. In: 4th Intl. Conf. Advanced Engineering Design, 5-8 September 2004, Glasgow Scotland, UK.

Dubey, V. N. and Crowder, R. M., 2004. Grasping and control issues in adaptive end effectors. In: ASME International Design Engineering Technical Conference, 28 September -2 October 2004, Salt Lake City, Utah (USA), pp. 327-335.

Dubey, V. N. and Crowder, R. M., 2003. Designing a dexterous reconfigurable packaging system for flexible automation. In: ASME International Design Engineering Technical Conference, 2-6 September 2003, Chicago, Illinois (USA), pp. 1033-1039.

Dubey, V. N. and Crowder, R. M., 2002. A finger mechanism for adaptive end effectors. In: ASME International Design Engineering Technical Conference, 29 September - 2 October 2002, Montreal, Canada, pp. 995-1001.

Gabrys, B. and Bargiela, A., 1998. Simulation of Water Distribution Systems. In: The European Simulation Symposium (ESS'98), October 26-28, 1998, Nottingham, UK, pp. 273-277.

Gabrys, B. and Bargiela, A., 1995. Neural Simulation of Water Systems for Efficient State Estimation. In: The European Simulation and Modelling Conference (ESM'95), June 5-7, 1995, Prague, Czech Republic, pp. 775-779.


Torres Perez, A., 2011. Tribological assessment of oil condition sensors for marine launching equipment. Doctorate Thesis (Doctorate). Bournemouth University.

Wang, W., 2010. Rolling contact fatigue of silicon nitride. Doctorate Thesis (Doctorate). Bournemouth University.

Thomas, B., 2009. Friction and Wear Performance of Lifeboat Launch Slipways. Doctorate Thesis (Doctorate). Bournemouth University.

Banks, A., 2009. A Nature inspired guidance system for unmanned autonomous vehicles employed in a search role. Doctorate Thesis (Doctorate). Bournemouth University.

Zhao, P., 2006. Three-dimensional boundary element and experimental analysis of lubricant ceramic surface ring cracks in rolling contact. Doctorate Thesis (Doctorate). Bournemouth University.

Khan, Z. A., 2006. Rolling Contact Wear of Hybrid Ceramic Bearings with Refrigerant Lubrication. Doctorate Thesis (Doctorate). Bournemouth University.

Voles, P., 2005. Feature-based object tracking in maritime scenes. Doctorate Thesis (Doctorate). Bournemouth University.

Smith, A. A. W., 2004. Identification and tracking of marine objects for collision risk estimation. Doctorate Thesis (Doctorate). Bournemouth University.

Thomas, B., 2004. Minimising Impact: How legislation and sustainable design can reduce the environmental cost of a mobile phone. Masters Thesis (Masters). Bournemouth University.

Wang, Y., 2001. Failure modes of silicon nitride rolling elements with ring crack defects. Doctorate Thesis (Doctorate). Bournemouth University.

Cobb, J. E., 2000. An In-Shoe Laser Doppler Sensor for Assessing Plantar Blood Flow in the Diabetic Foot. Doctorate Thesis (Doctorate). Bournemouth University.

Goodson, K. J., 1987. Automated interpretation of digital images of hydrographic charts. Doctorate Thesis (Doctorate). Dorset Institute of Higher Education.

Pleydell, M. E., 1986. The application of laser doppler technique to vibration measurement and position control. Doctorate Thesis (Doctorate). Dorset Institute of Higher Education.

This list was generated on Sat Nov 28 00:31:48 2015 GMT.