Saeed, A., Khan, Z. A., Hadfield, M. and Davies, S., 2013. Material Characterization and Real-Time Wear Evaluation of Pistons and Cylinder Liners of the Tiger 131 Military Tank. Tribology Transactions, 56 (4), pp. 637-644.

Fayolle, P.-A. and Pasko, A., 2012. Optimized surface discretization of functionally defined multi-material objects. Advances in Engineering Software, 45 (1), pp. 301-312.

Pasko, G., Pasko, A., Vilbrandt, T., Filho, A. and da Silva, J., 2011. Ascending in space dimensions: digital crafting of M. C. Escher’s graphic art. Leonardo, 44 (5), pp. 411-416.

Hunt, C., Reynolds, T. and Stock, N., 2011. Electronic Technicians Limited. Project Report. UK: TSB. (Unpublished)

Vilbrandt, T., Vilbrandt, C., Pasko, G., Stamm, C. and Pasko, A., 2011. Digitally interpreting traditional folk crafts. IEEE Computer Graphics and Applications, 31 (4), pp. 12-18.

Eng, T.-Y. and Spickett-Jones, G., 2010. An Investigation Of Marketing Capabilities and Upgrading Performance Of Manufacturers In Mainland China and Hong Kong. Journal of World Business, 45 (1). (Submitted)

Kadlec, P., 2009. On robust and adaptive soft sensors. PhD Thesis (PhD). Bournemouth University.

Vilbrandt, T., Pasko, A. and Vilbrandt, C., 2009. Fabricating Nature. Technoetic Arts, 7 (2), pp. 165-174.

Eng, T.-Y., 2009. Manufacture Upgrade and Interfirm Relationship Development: The Case of Electronics Firms in The Pearl River Delta. Asia Pacific Business Review, 15 (4), pp. 507-525.

Pasko, A., Vilbrandt, T., Fryazinov, O. and Adzhiev, V., 2009. Procedural function-based spatial microstructures. Technical Report. Bournemouth University.

Eng, T.-Y. and Quaia, G., 2009. Strategies for Improving New Product Adoption in Uncertain Environments: A Selective Review of the Literature. Industrial Marketing Management, 38 (3), pp. 275-282.

Mathias, M. J., Reynolds, T. and Velay, X., 2008. Possibilities and Pitfalls with Rapid Prototyping and Rapid Manufacturing: The Role of These Emerging Technologies in Design Education. In: New Perspectives in Design Education. EPDE 08: 10th International Conference on Engineering and Product Design Education. Institution of Engineering Designers and Design Society.

Pasko, A., Adzhiev, V. and Comninos, P., 2008. Heterogeneous objects modelling and applications : collections of papers on foundations and applications. Berlin / Heidelberg: Springer Verlag.

Kadlec, P. and Gabrys, B., 2008. Application of Computational Intelligence Techniques to Process Industry Problems. In: Nguyen, N.T., Kolaczek, G. and Gabrys, B., eds. Knowledge Processing and Reasoning for Information Society. Warsaw, Poland: EXIT Publishing House, pp. 305-322.

Cang, S. and Yu, H., 2008. Overview of Modeling, Scheduling, Planning, and Control Using Petri Net Representation and AI Search. In: International Conference on Advanced Design and Manufacture (ICADAM), 14-16 January 2008, Sanya, P R China, pp. 397-406.

Dubey, V. N. and Dai, J. S., 2006. A packaging robot for complex cartons. Industrial Robot, 33 (2), pp. 82-87.

Grewal, G. S., Dubey, V. N. and Claremont, D., 2006. Isochromatic demodulation by fringe scanning. Strain, 42 (4), pp. 273-281.

Zhao, P., Hadfield, M., Wang, Y. and Vieillard, C., 2005. Subsurface propagation of partial ring cracks under rolling contact: Part II. Fracture mechanics analysis. Wear, 261 (3-4), pp. 390-397.

Peng, Z., 2005. Numerical modelling of the aluminium extrusion process. PhD Thesis (PhD). Bournemouth University.

Peng, Z. and Sheppard, T., 2005. Effect of die pockets on multi-hole die extrusion. Materials Science and Engineering A, 407 (1-2), pp. 89-97.

Dimla, D. E., Camilotto, M. and Miani, F., 2005. Design and Optimisation of Conformal Cooling Channels in Injection Moulding Tools. Journal of Materials Processing Technology, 164-16, pp. 1294-1300.

Velay, X., 2004. Analysis of the conform process: a specific form of aluminium extrusion. PhD Thesis (PhD). Bournemouth University.

Garland, N. P., 2004. Sustainable design of hydrocarbon refrigerants applied to the hermetic compressor. PhD Thesis (PhD). Bournemouth University.

Zhao, P., Hadfield, M., Wang, Y. and Vieillard, C., 2004. The influence of test lubricants on the rolling contact fatigue failure mechanisms of silicon nitride ceramic. Wear, 257 (9-10), pp. 1047-1057.

Dimla, D. E., 2004. The impact of cutting conditions on cutting forces and vibration signals in turning with plane face geometry inserts. Journal of Materials Processing Technology, 155-15, pp. 1708-1715.

Vaseghi, R., 2004. A new method of termination for heavy-duty synthetic rope fibres. PhD Thesis (PhD). Bournemouth University.

Kim, J.-Y., Wong, V. and Eng, T.-Y., 2003. The Impact of Platform-Based Product Development Proficiencies on Product Family Success. Journal of Strategic Marketing, 11 (4), pp. 255-269.

Wang, Y. and Hadfield, M., 2003. Failure modes of ceramic rolling elements with surface crack defects. Wear, 256 (1-2), pp. 208-219.

Dimla, D. E., Hopkinson, N. and Rothe, H., 2003. Investigation of complex rapid EDM electrodes for rapid tooling applications. The International Journal of Advanced Manufacturing Technology, 23 (3-4), pp. 249-255.

Wang, Y. and Hadfield, M., 2003. A mechanism for nucleating secondary fractures near a pre-existing flaw subjected to contact loading. Wear, 254 (7-8), pp. 597-605.

Duan, X. and Sheppard, T., 2003. Simulation and control of microstructure evolution during hot extrusion of hard aluminium alloys. Materials Science and Engineering A, 351 (1-2), pp. 282-292.

Velay, X., Duan, X. and Sheppard, T., 2003. Prediction of material flow pattern in the hot extrusion of aluminium alloys by the finite element method. Materials Science Forum, 426-43, pp. 3807-3812.

Duan, X. and Sheppard, T., 2002. Three dimensional thermal mechanical coupled simulation during hot rolling of aluminium alloy 3003. International Journal of Mechanical Sciences, 44 (10), pp. 2155-2172.

Wang, Y. and Hadfield, M., 2002. A study of line defect fatigue failure of ceramic rolling elements in rolling contact. Wear, 253 (9-10), pp. 975-985.

Hadley, G. J. M., 2002. Development and in-vitro evaluation of a potentially implantable fibre-optic glucose sensor probe. PhD Thesis (PhD). Bournemouth University.

Dimla, D. E., 2002. The correlation of vibration signal features to cutting tool wear in a metal turning operation. The International Journal of Advanced Manufacturing Technology, 19 (10), pp. 705-713.

Howarth, G. and Hadfield, M., 2002. An Assessment Model for Sustainable Product Development. In: Managing Sustainable Products: Organisational considerations in product and service development: Towards Sustainable Product Design, 7th International Conference, 28-29 October 2002, British Standards Institution, Chiswick, London, pp. 147-157.

Wang, Y. and Hadfield, M., 2001. Ring crack propagation in silicon nitride under rolling contact. Wear, 250 (1-12), pp. 289-292.

Wang, Y., 2001. Failure modes of silicon nitride rolling elements with ring crack defects. PhD Thesis (PhD). Bournemouth University.

Sewell, P., Noroozi, S., Vinney, J. and Andrews, S., 2000. A Tool to Aid Below-Knee Prosthetic Socket Fitting. In: Special Reception in 2000 for Britain's Younger Engineers, 4 December 2000, The House of Commons, London. (Unpublished)

Ciantar, C., 2000. Sustainable development of refrigerator systems using replacement environmentally acceptable refrigerants. PhD Thesis (PhD). Bournemouth University.

Noroozi, S., Vinney, J., Sewell, P. and Al-Rawe, A., 2000. An Empirical Model of the Structural Characteristics of Un-ribbed Cylindrical GRP Tanks. In: TMCE 2000 Third international symposium on tools and methods of competitive engineering, April 18-21 2000, Delft University, pp. 571-580.

Noroozi, S., Sewell, P., Vinney, J. and Andrews, S., 2000. Introduction of a Novel Tool for Real-Time Monitoring and Assessment of Prosthetic Socket Fit. In: Condition monitoring and diagnostic engineering management : COMADEM 2000 : proceedings of the 13th International Congress. , 3-8 December 2000, Houston, Texas, USA, pp. 597-605.

Noroozi, S., Vinney, J. and Sewell, P., 1999. The Application of Redundant Industrial Robots In Bio-Mechanical Engineering. In: Advanced Robotics Development Conference on Medical Robotics, 23-24 September 1999, Pisa, Italy. (Unpublished)

Chisholm, A. I., 1999. A Technology transfer process from academic research to manufacturing industry. Masters Thesis (Masters). Bournemouth University.

Noroozi, S., Vinney, J., Wait, D. and Sewell, P., 1999. The Use of Boundary Element Analysis as a Design Aid to Analyse Complex Aspects of Aircraft Landing Gear Joint Design. In: 1st International Conference in Boundary Element Techniques, July 1999, Queen Mary College, London, pp. 425-436.

Koohgilani, M., 1998. Damage accumulation in high performance synthetic fibre ropes. PhD Thesis (PhD). Bournemouth University.