Article

Saeed, A., Khan, Z. A. and Montgomery, E.L., 2013. Corrosion Damage Analysis and Material Characterization of Sherman and Centaur - The Historic Military Tanks. Materials Performance and Characterization, 2 (1), 1 - 16 .

Dyer, B. T.J., Sewell, P. and Noroozi, S., 2012. An Investigation into the Measurement of Mechanical Stiffness of Lower-limb Prosthesis in 100m Sprinting with a Uni-lateral Amputation. Assistive Technology. (Submitted)

Flitta, I., Sheppard, T. and Peng, Z., 2007. FEM analysis to predict development of structure during extrusion and subsequent solution soak cycle. Materials Science and Technology, 23 (5), pp. 582-592.

Hadfield, M. and Khan, Z. A., 2006. Manufacturing induced residual stress influence on the rolling contact fatigue life performance of lubricated silicon nitride bearing materials. Materials and Design, 28 (10), pp. 2688-2693.

Mathias, M. J. and Tabeshfar, K., 2006. Design and development of a new acetabular cup prosthesis. Materials, Science and Engineering C, 26 (8), pp. 1428-1433.

Hadfield, M., Tobe, S., Wang, Y. and Khan, Z. A., 2005. Residual stress variations during rolling contact fatigue of refrigerant lubricated silicon nitride bearing elements. Ceramics International, 32 (7), pp. 751-754.

Peng, Z. and Sheppard, T., 2005. Effect of die pockets on multi-hole die extrusion. Materials Science and Engineering A, 407 (1-2), pp. 89-97.

Kang, J. and Hadfield, M., 2005. The effects of lapping load in finishing advanced ceramic balls on a novel eccentric lapping machine. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 219 (7), pp. 505-513.

Kang, J. and Hadfield, M., 2005. The polishing process of advanced ceramic balls using a novel eccentric lapping machine. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 219 (7), pp. 493-504.

Peng, Z., Sheppard, T. and Velay, X., 2004. A discussion of the scaling effect in numerical simulation of the extrusion process. Materials Science and Technology, 20 (10), pp. 1335-1339.

Bakhtiyarov, S. I., Dupac, M., Overfelt, R. A. and Teodorescu, S. G., 2004. On Electrical Conductivity Measurements of Molten Metals by Inductive Technique. Journal of Fluids Engineering, 126 (3), pp. 468-471.

You, L.H., Hu, J.H., Shi, Y.H. and Zhang, J. J., 2004. Single-patch surfaces for tool shape design and finite element analysis of hot extrusion. Journal of Materials Processing Technology, 150 (1-2), pp. 62-69.

Duan, X., Velay, X. and Sheppard, T., 2004. Application of finite element method in the hot extrusion of aluminium alloys. Materials Science and Engineering A, 369 (1-2), pp. 66-75.

Peng, Z. and Sheppard, T., 2004. A study on surface cracking in extrusion of aluminium alloy AA2014. Materials Science and Technology, 20 (9), pp. 1179-1191.

Peng, Z. and Sheppard, T., 2004. Simulation of multi-hole die extrusion. Materials Science and Engineering A, 367 (1-2), pp. 329-342.

Kang, J. and Hadfield, M., 2003. Comparison of Four-Ball and Five-Ball Rolling Contact Fatigue Tests on Lubricated Si3N4/Steel Contact. Materials & Design, 24 (8), pp. 595-604.

Duan, X. and Sheppard, T., 2003. Simulation and control of microstructure evolution during hot extrusion of hard aluminium alloys. Materials Science and Engineering A, 351 (1-2), pp. 282-292.

Ahmed, R., Hadfield, M. and Kang, J., 2002. The effects of material combination and surface roughness in lubricated silicon nitride/steel rolling contact fatigue. Materials and Design, 24 (1), pp. 1-13.

Duan, X. and Sheppard, T., 2002. Three dimensional thermal mechanical coupled simulation during hot rolling of aluminium alloy 3003. International Journal of Mechanical Sciences, 44 (10), pp. 2155-2172.

Ahmed, R. and Hadfield, M., 2002. Mechanisms of fatigue failure in thermal spray coatings. Journal of Thermal Spray Technology, 11 (3), pp. 333-349.

Wang, Y. and Hadfield, M., 2002. A study of line defect fatigue failure of ceramic rolling elements in rolling contact. Wear, 253 (9-10), pp. 975-985.

Maquosi, A. and Ball, F., 2002. The Development and Evaluation of A Monitoring Technique for M-FAC. International Journal of Simulation, 3 (1-2), pp. 101-110.

Peng, X. and Chang, J., 2001. A microstructure-based analysis for cyclic plasticity of dual-phase pearlitic rail steels. Acta Mechanica Solida Sinica, 14 (4), pp. 334-343.

Wang, Y. and Hadfield, M., 2001. Ring crack propagation in silicon nitride under rolling contact. Wear, 250 (1-12), pp. 289-292.

Yu, H., Liu, Y., Chang, J. and Zhao, C., 2001. The Evaluation and Trouble Shooting of the Front Side Panel Forming Process. Metal Forming Technology, 19 (5), pp. 39-42.

Kang, J. and Hadfield, M., 2001. A Noval Eccentric Lapping Machine for Finishing Advanced Ceramic Balls. Journal of Engineering Manufacture Part 'B' : Proceedings of the Institution of Mechanical Engineers, 215 (6), pp. 781-795.

Kang, J. and Hadfield, M., 2001. Parameter Optimisation by Taguchi Methods for Finishing Advanced Ceramic Balls Using a Novel Eccentric Lapping Machine. Journal of Engineering Manufacture Part 'B' : Proceedings of the Institution of Mechanical Engineers, 215, pp. 69-78.

Kang, J., Hadfield, M. and Cundill, R. T., 2001. Rolling Contact Fatigue Performance of HIPed Si3N4 With Different Surface Roughness. Ceramics International, 27 (7), pp. 781-794.

Hashemi, S. and Koohgilani, M., 1995. Fracture toughness of Injection Moulded Glass Fibre Reinforced Polypropylene. Polymer Engineering & Science, 35 (13), pp. 1124-1132.

Staelens, Y., Brownsword, R. and Pitt, E.E.H., 1985. Two 13th century steelyard weights from Shropshire. Transactions of the Shropshire Archaeological and Historical Society, 64, pp. 25-28.

Book Section

Dupac, M., Bakhtiyarov, S. and Overfelt, R. A., 2003. Volume Computation of a Levitated Aspherical Droplet From 2-D Image Information. In: ASME 2003: Proceedings of ASME International Mechanical Engineering Congress and Exposition. ASME, pp. 59-64.

Bakhtiyarov, S., Dupac, M., Overfelt, R. A. and Teodorescu, S. G., 2002. Fluid Flow Effect in Electrical Conductivity Measurements of Molten Metals by Inductive Technique. In: Proceedings of the 2002 ASME joint US-European Fluids Engineering Conference. Volume 2: Symposia and General Papers, Parts A and B. ASME, pp. 21-24.

Wang, Y. and Hadfield, M., 2002. Rolling Contact Fatigue of Ceramics. In: Becker, W.T. and Shipley, R.J., eds. ASM Handbook: Failure Analysis and Prevention. Materials Park, Ohio: (American Society of Testing Materials) ASM International.

Teodorescu, S. G., Dupac, M., Bakhtiyarov, S. and Overfelt, R. A., 2001. Numerical Simulations of Fluid Flow During Electromagnetic Stirring of Metals. In: Proceedings, Rheology and Fluid Mechanics of Non-Linear Materials. ASME.

Koohgilani, M. and Saidpour, H., 1995. High Performance Ropes for Catenary Mooring. In: Graczyk, T., Jastrzębski, T. and Brebbi, C.A., eds. Marine technology and transportation: proceedings of the First International Conference on Marine Technology, ODRA 95. Southampton, England: Computational Mechanics.

Koohgilani, M. and Saidpour, H., 1995. A Review of the applications and Properties of High Performance in Synthetic Fibres Used in Marine. In: Graczyk, T., Jastrzębski, T. and Brebbia, C.A., eds. Marine technology and transportation: proceedings of the First International Conference on Marine Technology, ODRA 95. Southampton, England: Computational Mechanics.

Monograph

Koohgilani, M., 1995. An analysis of High Performance Fibre Ropes. Technical Report. Institute of Materials.

Koohgilani, M., 1995. High Performance Fibres Take to the Skies. Technical Report. Technical Textiles.

Conference or Workshop Item

Koohgilani, M., 2010. Technophobia, an old problem, increasing challenges, new and old solutions. In: EPDE2010: 12th International Conference on Engineering and Product Design Education: When Design Education and Design Research Meet, 2-3 September 2010, Norwegian University of Science and Technology (NTNU), Trondheim. (Unpublished)

Koohgilani, M., 2010. Unscrambling the vocabulary of technology for designers and vice versa. In: EPDE2010: 12th International Conference on Engineering and Product Design Education: When Design Education and Design Research Meet, 2-3 September 2010, Norwegian University of Science and Technology (NTNU), Trondheim. (Unpublished)

Koohgilani, M. and Dyer, B. T.J., 2009. A New Breed of Design Students and their attitude to Technology. In: EPDE'09: 11th International Conference on Engineering Product Design Education: Creating a Better World, 10-11 September 2009, University of Brighton, England.

Sheppard, T. and Peng, Z., 2008. Control of Asymetric Recrystallization in Single and Multi-Hole Die Extrusion. In: ET 08: The Conference for Innovations in Aluminum Extrusion, 13-16 May 2008, Gaylord Palms, Orlando, FL. (Unpublished)

Sheppard, T., 2008. Keynote Address: Innovative Methodologies to Increase Productivity by Simulating Development of Structure During Extrusion and Solution Soaking. In: ET 08: The Conference for Innovations in Aluminum Extrusion, 13-16 May 2008, Gaylord Palms, Orlando, FL. (Unpublished)

Sheppard, T. and Velay, X., 2008. Prediction and Control of Subgrain Size in the Hot Extrusion of Aluminum Alloys with Feeder Plates. In: ET 08: The Conference for Innovations in Aluminum Extrusion, 13-16 May 2008, Gaylord Palms, Orlando, FL. (Unpublished)

Longjang, N., Sheppard, T. and Velay, X., 2008. Process Optimization and Metal Flow Analysis of Direct and Indirect Extrusion of Aluminium Using FEM Simulation. In: The 6th International Conference on Manufacturing Research (ICMRA08), September 2008, Brunel University, London. (Unpublished)

Wang, W., Hadfield, M. and Wereszczak, A.A., 2007. C-Sphere Strength as an Indicator of Rolling Contact Performance of Silicon Nitride. In: Contact/Surface: Eighth International Conference on Computer Methods and Experimental Measurements for Surface and Contact Mechanics: Proceedings, 16-18 May 2007, Ashurst, New Forest, England, pp. 111-124.

Wang, W., Wereszczak, A.A. and Hadfield, M., 2007. Flexure Strength of Silicon Nitride as Indication of Rolling Contact Performance Measured on Ball-on-Rod and Modified Four-Ball Testers. In: 34th Leeds-Lyon Symposium on Tribology: Tribological Contacts and Component Life. Material transformation, fatigue, crack initiation and propagation, 4-7 September 2007, Lyon, France. (Unpublished)

Sheppard, T. and Velay, X., 2007. Keynote Address: Latest Advances in Extrusion Technology and Simulation in Europe and 2nd Extrusion Benchmark. In: Extrusion Workshop 2007 and 2nd Extrusion Benchmark, 20-21st September 2007, Bologna, Italy, pp. 25-38.

Hadfield, M., 2007. Mechano-Erosion: A Novel Test Methodology to Accelerate Erosion in Rolling Contact Fatigue Experiments. DDME-8. In: DIPRE'07: Conference on Diagnosis and Prediction in Mechanical Engineering( Systems, 26-27 October 2007, Galati, Romania. (Unpublished)

Wang, W., Hadfield, M., Wereszczak, A.A. and Wang, Y., 2006. Rolling Contact Performance of a Sintered and Reaction-Bonded Silicon Nitride in Relation to Surface Integrity. In: Tribology 2006: Surface Engineering and Tribology for Future Engines and Drivelines, 12-13 July 2006, Institution of Mechanical Engineers, Westminster, England. (Unpublished)

Ciantar, C., Magri, V. and Hadfield, M., 2003. Investigating the Environmental Impact That Issues of Tribology Have on the Use Phase of a Domestic Refrigerator. In: 2nd International Conference on Tribology in Environmental Design 2003: The Characteristics of Interacting Surfaces a Key Factor in Sustainable and Economic Products, 8-10 September 2003, Bournemouth University, pp. 85-96.

Wang, Y. and Hadfield, M., 2003. Life Predication for Surface Crack Initiated Contact Fatigue of Silicon Nitride Bearing Balls. In: Tribological Design for Research and Engineering Systems: Proceedings of the 29th Leeds-Lyon Symposium, 3-6 September 2002, Bodington Hall Leeds University, England, pp. 349-358.

Khan, Z. A., Hadfield, M. and Wang, Y., 2003. Rolling Wear of Silicon Nitride Bearing Material in a Simulated Refrigerant Environment Using a Novel Pressurised Chamber. In: 2nd International Conference on Tribology in Environmental Design 2003 : the characteristics of interacting surfaces : a key factor in sustainable and economic products, 8-10 September 2003, Bournemouth University, England, pp. 337-346.

Ahmed, R. and Hadfield, M., 2003. Wear Mapping to Optimise Overlay Coating Design in Rolling Silding Contacts. In: 2nd International Conference on Tribology in Environmental Design 2003 : the characteristics of interacting surfaces : a key factor in sustainable and economic products, 8-10 September 2003, Bournemouth University, pp. 59-70.

You, L.H., Hu, J.H., Shi, Y.H. and Zhang, J. J., 2002. A new surface modelling method and its application in tool shape design for finite element simulation of metal forming. In: Advances in Concurrent Engineering, Proceedings of the 9th ISPE International Conference on Concurrent Engineering (ISPE CE 2002), 27-31 July , 2002, Cranfield, United Kingdom.

Amali, R., Noroozi, S. and Vinney, J., 2002. A Hybrid Approach Using Photoelasticity, Finite Element Analysis and an Artificial Neural Network in Mechanical Engineering. In: Fifth International Conference on Adaptive Computing in Design and Manufacture (ACDM2002), 16-18 April 2002, University of Exeter, England. (Unpublished)

Koohgilani, M. and Saidpour, H., 1994. High Performance Synthetic Fibre Ropes For Mooring Of Ships And Offshore Installations. In: The Proceedings of International Seminar of Polymer Science & Technology, May 1994, Shiraz, Iran.

Thesis

Longjang, N., 2010. Numerical modelling of the aluminium extrusion process when producing complex seactions. PhD Thesis (PhD). Bournemouth University.

García-Atance Fatjo, G., 2010. Surface response of ceramics subject to erosive wear. PhD Thesis (PhD). Bournemouth University.

Tzanakis, I., 2010. Sustainable design and durability of domestic micro combined heat and power scroll expander systems. PhD Thesis (PhD). Bournemouth University.

Karunamurthy, B., 2009. Erosion and rolling contact wear mechanisms in silicon nitride hybrid bearings. PhD Thesis (PhD). Bournemouth University.

Velay, X., 2004. Analysis of the conform process: a specific form of aluminium extrusion. PhD Thesis (PhD). Bournemouth University.

Mathias, M. J., 2004. Development of an optimum acetabular cup prosthesis. PhD Thesis (PhD). Bournemouth University.

Flitta, I., 2004. Simulation of aluminium extrusion process. PhD Thesis (PhD). Bournemouth University.

Asaad, M., 2002. Damage accumulation in hybrid woven fabric composites. PhD Thesis (PhD). Bournemouth University.

Duan, X., 2001. Some problems in hot rolling of al-alloys solved by the finite element method. PhD Thesis (PhD). Bournemouth University.

Wang, Y., 2001. Failure modes of silicon nitride rolling elements with ring crack defects. PhD Thesis (PhD). Bournemouth University.

Collins, D. S.. P., 1989. Mill roll profile control by means of spray cooling. PhD Thesis (PhD). Dorset Institute of Higher Education and Davy Mckee (Poole) Ltd.